Magnetic storage | EPFL Graph Search

Magnetic storage or magnetic recording is the storage of data on a magnetized medium. Magnetic storage uses different patterns of magnetisation in a magnetizable material to store data and is a form of non-volatile memory. The information is accessed using one or more read/write heads. Magnetic storage media, primarily hard disks, are widely used to store computer data as well as audio and video signals. In the field of computing, the term magnetic storage is preferred and in the field of audio and video production, the term magnetic recording is more commonly used. The distinction is less technical and more a matter of preference. Other examples of magnetic storage media include floppy disks, magnetic tape, and magnetic stripes on credit cards. History Magnetic storage in the form of wire recording—audio recording on a wire—was publicized by Oberlin Smith in the Sept 8, 1888 issue of Electrical World. Smith had previously filed a patent in September, 1878 but found no

Single Crystal Growth of Constantan by Vertical Bridgman Method

This project deals with aspects involved in the growth of single-crystals of Constantan. Constantan is an alloy of Nickel in Copper, whose technological interest is that resistance is independent of temperature over a very large range of temperatures (hence the name Constantan). This, along with other suitable properties such as high strain sensitivity, high resistivity and low coefficient of thermal expansion makes it the principal component of all modern strain gauges used. However, Constantan also represents exactly the critical composition of Nickel in Copper (45% by weight Ni in Cu), which is the border between ferromagnetism and paramagnetism at low temperature. Such a transition in magnetic states at low (zero) temperature is called a quantum phase transition, and results in a uniquely scaling excitation spectrum. The eventual purpose of growing these single crystals is to validate our hypothesis that in fact the technologically relevant properties of Constantan are the result of quantum critical fluctuations. This can be investigated by a technique called inelastic neutron scattering.

2011

Magnetic states and spin-wave modes in single ferromagnetic nanotubes

Daniel Rüffer

In this thesis the electrical properties, magnetic states and spin wave resonances of individual magnetically hollow ferromagnetic nanotubes have been studied. They were prepared from the different materials Nickel (Ni), Permalloy (Py) and Cobalt-Iron-Boron (CoFeB), deposited as shells onto non-magnetic Gallium-Arsenide (GaAs) semiconductor nanowires via Atomic Layer Deposition (ALD), thermal evaporation and magnetron sputtering, respectively. The resulting nanotubes had lengths between 10 to 20 μm, diameters of 150 to 400 nm and tube walls (shells) which were 20 to 40nm thick. Structural analysis of the tubes by Transmission Electron Microscopy revealed a poly(nano)crystalline (Ni, Py) and amorphous (CoFeB) structure. Electrical transport experiments as a function of temperature revealed different transport mechanisms for each of the materials. Electron-phonon scattering dominated the temperature dependence of the resistivity in Ni, while a clear evidence for electron magnon scattering was observed in Py. Electron-electron interaction in granular and amorphous media was identified as the major contribution to the temperature dependence in CoFeB. The Anisotropic Magnetoresistance (AMR) ratios have been determined for all tubes and different temperatures. Ni nanotubes exhibited a large relative AMR effect of 1.4% at room temperature. The AMR measurements provided information about the magnetic configurations as well as the magnetization reversal mechanism. Indications for the formation of vortex segments in Ni tubes were found for the magnetization reversal when the magnetic field was perpendicular to the nanotube axis. In cooperation with the Poggio group in Basel, cantilever magnetometry has been used for the further characterization of the nanotube magnetization. The magnetization curves were compared to the AMR measurements and finite element method (FEM) micromagnetic simulations. The comparison between the experimental results and the simulations suggested that the roughness of Ni tubes gave rise to segmented magnetic switching. An almost perfect axial alignment of the remanent magnetization has been observed in Py and CoFeB nanotubes. The influence of the inhomogeneous internal field in transverse magnetic fields was investigated by simulation. The segment-wise alignment of spins with the field direction is argued to provoke characteristic kinks in the hysteresis curve and measured AMR effect. Magnetothermal spatial mapping experiments using the anomalous Nernst effect (ANE) complemented the magnetotransport experiments in cooperation with the group of Prof. Grundler in Munich. Here, first evidence of end-vortices entering the nanotube before reversal could be found. Electrically detected spin wave resonance experiments have been performed in cooperation with the group of Prof. Grundler on individual nanotubes. The detected voltage, generated by the spin rectification effect, revealed multiple resonances in the GHz frequency. The experimentally observed resonances were compared to calculated ones extracted from dynamic simulations. With this comparison, the signatures could be attributed to azimuthally confined spin-wave modes. The deduced dispersion relation suggested the quantization of exchange dominated spin waves in that resonance frequencies follow roughly a quadratic dependence on the wave vector.

EPFL2014

Atomic layer deposition of Ni and Ni80Fe20 for tubular spin-wave nanocavities

Maria Carmen Giordano

Magnetic thin films and magnetic nanostructures have become essential components of modern technological applications. Modern branches of magnetisms focus on spin-charge coupling (spintronics) and the collective excitation of spin waves in magnetically ordered materials (magnonics). In particular, spin waves represent a promising charge-free medium to encode and transmit information in the GHz frequency regime, relevant for microwaves technologies. The ever-increasing demand for compact and portable electronic and telecommunication devices leads to the need for further miniaturization and high integration density of their functional components. These aspects have prompted nanomagnetism to venture the third dimension. This development is also motivated by novel physical phenomena and functionalities predicted to arise from three-dimensional (3D) complex magnetic configurations. In order to advance the research in 3D spintronics and 3D magnonics, it will be essential to have control over the fabrication of 3D nanoarchitectures and to access the new properties of individual nanostructures emerging from new complex 3D spin-textures. These two challenges are addressed in this thesis. Ferromagnetic nanotubes (NTs) represent the ideal 3D system for the study of shape dependent static and dynamic magnetic properties. Their magnetic configurations, as well as the spin wave confinement and propagation inside them, can be engineered by changing their geometrical parameters. First, in order to fabricate 3D magnetic device architectures, we explored atomic layer deposition (ALD). The thickness and quality of the thin films deposited with ALD are irrespective of the geometry of the surface on which they are deposited. This characteristic makes it ideal to fabricate 3D nanomagnets by magnetically coating 3D nanotemplates, e.g. nanowires (NWs) in the case of NTs. In this thesis we propose ALD processes for the conformal coating by means of two ferromagnetic materials conventionally used in planar spintronics and magnonics systems: Ni and permalloy (Py, Ni80Fe20), the second material expected to have a lower spin wave damping. By identifying correlations between ALD process parameters and thin film properties we optimized the materials in terms of conformality, electrical resistivity, anisotropic magnetoresistance (AMR) effect, spin wave damping and, in the case of permalloy, also stoichiometry. The optimized materials were then transferred onto GaAs nanowires templates, obtaining ferromagnetic NTs with hexagonal cross sections. We achieved Ni NTs with the lowest resistivity ever reported in similar ALD-grown Ni systems and a large AMR effect. We observed the lowest spin waves damping for permalloy NTs, exhibithing a value comparable with permalloy thin films achieved with conventional planar deposition techniques. Second, we investigated magnetic states and spin waves confinement in nanotubes experimentally and via micromagnetic simulations. We combined magnetoresistance measurements with Brillouin light scattering spectroscopy (BLS) and micromagnetic simulations to study Ni and Py NTs. BLS measurements, performed while irradiating NTs with microwaves, show that these nanotubes form spin-wave nanocavities which impose discrete wave vectors and confine GHz microwave signals on the nanoscale. Our experimental results show that the confinement can be engineered by changing the NT's geometrical parameters and magnetic states.

EPFL2021