Concept

Loss-of-coolant accident

Related publications (43)

Control of the hydrogen:deuterium isotope mixture using pellets in JET

Olivier Sauter, Yiming Li, Ambrogio Fasoli, Basil Duval, Jonathan Graves, Duccio Testa, Patrick Blanchard, Alessandro Pau, Federico Alberto Alfredo Felici, Cristian Sommariva, Antoine Pierre Emmanuel Alexis Merle, Haomin Sun, Michele Marin, Henri Weisen, Richard Pitts, Yann Camenen, Jan Horacek, Javier García Hernández, Marco Wischmeier, Nicola Vianello, Mikhail Maslov, Federico Nespoli, Yao Zhou, Davide Galassi, Antonio José Pereira de Figueiredo, Hamish William Patten, Samuel Lanthaler, Emiliano Fable, Francesca Maria Poli, Daniele Brunetti, Anna Teplukhina, Alberto Mariani, Kenji Tanaka, Bernhard Sieglin, Otto Asunta, Gergely Papp, Leonardo Pigatto

Deuterium pellets are injected into an initially pure hydrogen H-mode plasma in order to control the hydrogen: deuterium (H:D) isotope mixture. The pellets are deposited in the outer 20% of the minor radius, similar to that expected in ITER, creating trans ...

2019

Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy

Christian Leinenbach

The microstructures of alloys created via Additive Manufacturing (AM) can vary substantially from those present in cast or wrought products, due to the very rapid solidification associated with AM. While numerous studies have investigated the process-micro ...

2018

Modelling of fuel fragmentation, relocation and dispersal during Loss-of-Coolant Accident in Light Water Reactor

Vladimir Vladimirov Brankov

Recent LOCA tests with high burnup fuel at the OECD Halden Reactor Project and at Studsvik demonstrated the susceptibility of the fuel to fragment to small pieces, to relocate and possibly cause a hot-spot effect and to be dispersed in the event of claddin ...

EPFL2017

Investigation of the thermal conductivity of SiC/SiC cladding before and after irradiation

Loïc Guillaume Fave

Silicon carbide based composites are candidates for structural components and fuel claddings in nuclear power plants. In the frame of accident tolerant fuel research, the effective through-thickness thermal conductivity of SiC/SiC prototype claddings is in ...

EPFL2017

Thermal-hydraulic modeling of a novel HTS CICC for nuclear fusion applications

Pierluigi Bruzzone

A thermal-hydraulic model has been developed for the novel cable-in-conduit conductor (CICC) recently proposed by ENEA, which foresees the use of 2nd Generation REBCO-based Coated Conductor tapes stacked into twisted grooves slotted into an Al core. A cent ...

Ieee-Inst Electrical Electronics Engineers Inc2016

Innovative low-mass cooling systems for the ALICE ITS Upgrade detector at CERN

Manuel Gómez Marzoa

The Phase-1 upgrade of the LHC to full design luminosity, planned for 2019 at CERN, requires the modernisation of the experiments around the accelerator. The Inner Tracking System (ITS), the innermost detector at the ALICE experiment, will be upgraded by r ...

EPFL2016

Global Sensitivity Analysis of Transient Code Output Applied to a Reflood Experiment Model using the TRACE Code

Andreas Pautz, Damar Canggih Wicaksono, Omar Zerkak

Appropriate model assessment requires proper understanding of the impact of variations of model parameters and their interactions on results. However, in many thermal-hydraulic (TH) simulations, the code often predicts time-dependent output where the impac ...

American Nuclear Society2016

Efficient, compact and low loss thermo-optic phase shifter in silicon

Christophe Marcel Georges Galland

We design a resistive heater optimized for efficient and low-loss optical phase modulation in a silicon-on-insulator (SOI) waveguide and characterize the fabricated devices. Modulation is achieved by flowing current perpendicular to a new ridge waveguide g ...

Optical Soc Amer2014

Recent progress in R&D on tungsten alloys for divertor structural and plasma facing materials

Ho Ling Li, Nadine Baluc, Antoine Cyril David Hoffmann

Tungsten materials are candidates for plasma-facing components for the International Thermonuclear Experimental Reactor and the DEMOnstration power plant because of their superior thermophysical properties. Because these materials are not common structural ...

Elsevier Science Bv2013

A wrapper tube for a fuel subassembly of a nuclear reactor core and method for protecting fuel against overheating in case of coolant boiling

Konstantin Mikityuk, Aurélia Chenu, Kaichao Sun

he present invention discloses an innovative design of the sodium-cooled fast reactor subassembly wrapper tube (Figure 1 (b)) and a method for protecting the sodium-cooled fast reactor core against overheating and melting in case of the accidents accompani ...

2013

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.