Electromagnet

Natural sciences
Physics
Electromagnetism
Electrical networks

Related publications (32)

About
Privacy
Disclaimer

Graph Chatbot

Progress on the Design of the 15 T Magnet of the EDIPO Test Facility

Pierluigi Bruzzone, Kamil Sedlák, Roberto Guarino, Evgeny Solodko

EDIPO 2 (the upgraded EDIPO test facility) will provide a unique testbed for superconducting cables for fusion magnets,accelerators, and other applications. Compared to the previous magnet assembly, the magnetic field is enhanced from 12.35 T to 15 T, the ...

IEEE Institute of Electrical and Electronics Engineers2021

A cryogenic electro-optic interconnect for superconducting devices

Tobias Kippenberg, Amir Youssefi, Anton Lukashchuk, Nathan Rafaël Bernier, Liu Qiu, Itay Shomroni

A major challenge to the scalability of cryogenic computing platforms is the heat load associated with the growing number of electrical cable connections between the superconducting circuitry and the room-temperature environment. Compared with electrical c ...

2021

Analysis of the effects of thermal anchors on the reduction of the parasitic load to the EU-DEMO TF coils

Kamil Sedlák

The design of the superconducting magnet system of the EU-DEMO tokamak reached the end of the preconceptual design phase, and a careful investigation of the parasitic heat load from the room-temperature environment is needed. A possible route for the paras ...

2021

Intrinsic luminescence blinking from plasmonic nanojunctions

Tobias Kippenberg, Christophe Marcel Georges Galland, Giulia Tagliabue, Magalí Alejandra Lingenfelder, Sachin Suresh Verlekar, Wen Chen, Karla Banjac, Aqeel Ahmed, Philippe Andreas Rölli

Plasmonic nanojunctions, consisting of adjacent metal structures with nanometre gaps, can support localised plasmon resonances that boost light matter interactions and concentrate electromagnetic fields at the nanoscale. In this regime, the optical respons ...

Nature Research2021

Scanning SQUID microscopy in a cryogen-free dilution refrigerator

Philip Johannes Walter Moll, Maja Deborah Bachmann

We report a scanning superconducting quantum interference device (SQUID) microscope in a cryogen-free dilution refrigerator with a base temperature at the sample stage of at least 30 mK. The microscope is rigidly mounted to the mixing chamber plate to opti ...

2021

Experimental Investigation of a Small-Scale Organic Rankine Cycle Turbo-Generator Supported on Gas-Lubricated Bearings

Jürg Alexander Schiffmann, Kévin Rosset

Waste heat recovery (WHR) is expected to contribute to reducing CO2 emissions from trucks. Organic Rankine cycle (ORC) systems show the highest potential for this application, but still lack efficient small-scale expansion devices, in practice. A novel tur ...

2021

Nonlinear plasmonics with monocrystalline gold

Sergejs Boroviks

Plasmonic nanostructures allow to controllably enhance linear and nonlinear light-matter interactions by concentrating the electromagnetic fields at the scales below the diffraction limit. This feature is highly desired for many applications, e.g. bio- and ...

2021

Updates on Magnet Design For EU-DEMO Reactor: Optimization Studies on TF and CS Systems

Kamil Sedlák

In the framework of EU design activities for dimensioning the future fusion DEMOnstration reactor (DEMO), extensive analyses were conducted in EUROfusion context, aiming at ultimately defining the design of the DEMO magnets system. In this objective CEA (C ...

IEEE Institute of Electrical and Electronics Engineers2021

Design and Characterization of the Interlayer Joint Between Low-Field Nb3Sn Conductors of a Layer Wound DEMO TF Coil

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Mithlesh Kumar

In the frame of the conceptual design studies for the Toroidal Field (TF) coils of DEMO, a solution based on a layer-wound magnet, rectangular-shaped Cable-in-Conduit conductors and W&R manufacturing approach, is being developed. The feasibility and perfor ...

IEEE Institute of Electrical and Electronics Engineers2021

Prototype mitre bends of the ex-vessel waveguide system for the ITER upper launcher: Thermal hydraulic simulations and experiments with off-center mm-wave beams

Timothy Goodman, René Chavan, Matteo Vagnoni, Anastasia Xydou, Humberto Torreblanca Quiroz

On ITER, long pulse gyrotrons are required as a power source for electron cyclotron heating (ECH) and current drive (CD). The microwaves are guided from the gyrotrons, which are placed far from the Tokamak, into the plasma by transmission lines (TLs) and a ...

2021

Page 3 of 4

Prototype mitre bends of the ex-vessel waveguide system for the ITER upper launcher: Thermal hydraulic simulations and experiments with off-center mm-wave beams

Timothy Goodman, René Chavan, Matteo Vagnoni, Anastasia Xydou, Humberto Torreblanca Quiroz

2021