Induction generator | EPFL Graph Search

An induction generator or asynchronous generator is a type of alternating current (AC) electrical generator that uses the principles of induction motors to produce electric power. Induction generators operate by mechanically turning their rotors faster than synchronous speed. A regular AC induction motor usually can be used as a generator, without any internal modifications. Because they can recover energy with relatively simple controls, induction generators are useful in applications such as mini hydro power plants, wind turbines, or in reducing high-pressure gas streams to lower pressure. An induction generator draws reactive excitation current from an external source. Induction generators have an AC rotor and cannot bootstrap using residual magnetization to black start a de-energized distribution system as synchronous machines do. Power factor correcting capacitors can be added externally to neutralize a constant amount of the variable reactive excitation current. After starting, an induction generator can use a capacitor bank to produce reactive excitation current, but the isolated power system’s voltage and frequency are not self-regulating and destabilize readily. An induction generator produces electrical power when its rotor is turned faster than the synchronous speed. For a four-pole motor (two pairs of poles on stator) powered by a 60 Hz source, the synchronous speed is 1800 rotations per minute (rpm) and 1500 RPM powered at 50Hz. The motor always turns slightly slower than the synchronous speed. The difference between synchronous and operating speed is called "slip" and is often expressed as per cent of the synchronous speed. For example, a motor operating at 1450 RPM that has a synchronous speed of 1500 RPM is running at a slip of +3.3%. In operation as a motor, the stator flux rotation is at the synchronous speed, which is faster than the rotor speed. This causes the stator flux to cycle at the slip frequency inducing rotor current through the mutual inductance between the stator and rotor.

Contribution to the active generator principle for high power electric supply

Massimiliano Visintin

In recent years the use of solid state frequency converters is rapidly increasing in the industrial and power plants where electric machines are installed, since it allows variable speed operations for the electric system, thus becoming a key factor which is capable of increasing the overall efficiency, as well as the global plant flexibility. The benefits that can be reached when electric motors are under investigation can be so enticing, in particular from the perspective of the operating machine coupled to the motor, that drawbacks take a back seat and can be overcome. On the contrary, power electronic for variable speed is generally not used in power generation, since the gains brought out by the present technology are not sufficient to attract anyone's interest. There are some exceptions in the wind- and the hydro power plant businesses, where there are some cases of variable speed already introduced. However in the former applications the output power is limited to some MW, while in the latter the converter is sized only to a fraction of the whole generating power, since it feeds the machine's rotor.This dissertation investigates on a possible electronic converter for power generation in the 40 MW range and above, which is also attracting from both the cost's and the efficiency's point of view, as well as from the operation reliability perspective and thus may be proposed as a breakthrough in this field. Among the possible frequency converters, those ones have been selected which perform natural commutations only, i.e. those that employ thyristors as the semiconductor devices, since the efficiency, the robustness and the relatively high performances are actually the key success factors to be addressed from the beginning. Well known matrix converter topologies will be referred to, as well as new matrix converter arrangements will be brought out and analyzed: their behaviours will be targeted by the dissertation, in particular when different strategies are adopted for controlling the operations. Specifically comparisons will be carried out when the same converter topology is used, but driven by either the well-known cycloconverter strategy or the newly brought out "active generator" one. In addition several generator winding arrangements will be proposed and analyzed, with the aim of increasing the actual feasibility of the proposed solution. Finally some test results on a sized down experimental rig will be analyzed and compared to the simulation outcomes.

EPFL2006

A contribution to energy saving in induction motors

Electric motors consume over half of the electrical energy produced by power stations, almost the three-quarters of the electrical consumption in industry and almost the half of commercial electrical consumption in developed countries. Motors are by far the most important type of electric charges, and so constitute the main targets to achieve energy saving. Owing to their simple and robust construction, the asynchronous motors and especially those of squirrel-cage types, represent about 90-95% of the electrical energy consumption of electric motors, which is equivalent to about 53% of total electrical energy consumption. They are widely used as electrical drives in industrial, commercial, public service, traction and domestic applications. Owing to the importance of induction motors, this thesis is aimed at contributing to energy saving efforts, more specifically in the field of low power induction motors. A contribution is kept in perspective by taking into consideration the energy saving potential during the motor design stage as well as during its operation. Every effort to save energy in motor application can be made by always attempting to use energy only as much as what needed during its operation. The best way is to exploit the saving potential during motor design, while at the same time taking into account its intended application. It can be achieved either through the improvement of motor design or through the reduction of its input electrical energy when the motor has already been built. These two efforts are studied, elaborated and worked out thoroughly in this thesis. To attain this objective, a synthesis has been started with the description of how to model an induction motor. To obtain a better model, an improvement is proposed by using the Schwarz-Christoffel mapping to calculate the slot leakage inductance in induction motor. With such method, slot-leakage inductance can be determined more precisely, resulting in more accurate prediction of motor characteristics. It is based on the stored magnetic energy calculation using two-directional field distribution in the slot. The air gap influence can be observed easily, so that a reasonable slot leakage definition can be adopted. Unlike the conventional method, which is only suitable for rectangular slots (otherwise empirical corrections are required), the proposed general slot form can be extended to any desired polygonal slot form. Consideration of saturation is also indispensable because ignoring it could result in inaccuracy in motor performance prediction. Considering the saturation is essential owing to its important role in self-excitation phenomenon to establish voltage build-up in induction generator. However, the self-excitation phenomenon is undesirable in certain group of capacitor motors as it may hinder the switching-off process and mechanical braking at a desired moment. The undesirable switching-off failure condition is to be avoided by properly designing the capacitor motor. Like in this capacitor motor special application, where a proper design is useful from the point of view of operation safety, designing properly a motor is also very important in energy saving efforts. Motor design and optimization to minimize losses as well as to make possible wide speed-range motor operation are some of the efforts. However, when induction motor has already been built, saving energy is only possible by managing its supplying electrical energy. Various strategies are possible and a particular emphasis on the use of triac to reduce motor input voltage is presented. Besides, a brief economic saving evaluation is given to draw attention to the energy saving potential.

EPFL2005

A contribution to energy saving in induction motors

EPFL2005

Contribution to the active generator principle for high power electric supply

Massimiliano Visintin

EPFL2006