Concept

Rotor (electric)

Related publications (97)

The effect of nacelle-to-rotor size on the wake of a miniature wind turbine

Fernando Porté Agel, Arslan Salim Dar, Rim Majzoub

Wind tunnel experiments are performed to investigate the effect of nacelle-to-rotor size on the wake of a wind turbine under different Reynolds numbers. Four different turbine configurations are tested, which vary in the rotor diameter and nacelle length a ...

IOP Science2024

2024

Detection of Broken Rotor Bars in a Cage Induction Machine Using DC Injection Braking

Drazen Dujic

In this paper, an effective procedure for broken rotor bar (BRB) fault detection in a three-phase squirrel-cage induction machine (SCIM) is proposed. This approach relies on a motor current signature analysis (MCSA) by observing the specific fault-related ...

IEEE2022

This article proposes a swirling actuator that uses the electromagnetic radial force and mechanical gears to generate rotational torque. The proposed actuator generates a rotating radial force between an inner stator and a swirler. The gears on the swirler ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Experimental Investigation of Enhanced Grooves for Herringbone Grooved Journal Bearings

Jürg Alexander Schiffmann, Patrick Hubert Wagner, Philipp Kaspar Bättig

This paper presents the results of a theoretical and experimental investigation of the potential of enhanced groove geometries to increase the bearing clearance of a Herringbone Grooved Journal Bearing (HGJB) supported rotor. The theoretical study investig ...

2022

Experimental and numerical investigation of the unbalance behavior of rigid rotors supported by spiral-grooved gas journal bearings

Jürg Alexander Schiffmann, Elia Iseli

The forced response of rigid rotors, supported by herringbone-grooved gas journal bearings are investigated numerically and experimentally. The rotor configurations are varied by using end cylinders, attached at both sides of the shaft. Three rotors with d ...

ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD2022

Balancing high-speed rotors at low speed using optimized parametric excitation and tuned nonlinear feedback

Amit Yedidia Dolev

The paper presents an improved slow-speed mass balancing procedure capable of reducing high-speed related imbalance. Parametric excitation is used to project the small imbalance forces onto a chosen mode of vibration, corresponding to a high critical rotat ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Characterization and Verification of Eddy-Current Position Sensing for Magnetic Levitation

Yves Perriard, Sean Thomas, Juan Patricio Tomás Peralta Fierro

Magnetically-levitated drives are compelling in applications where the long-lifetime operation or process chamber encapsulation is a requirement. To exploit these advantages, contactless position sensors are needed to estimate the position of the rotor. Of ...

2021

Experimental Investigation of a Small-Scale Organic Rankine Cycle Turbo-Generator Supported on Gas-Lubricated Bearings

Jürg Alexander Schiffmann, Kévin Rosset

Waste heat recovery (WHR) is expected to contribute to reducing CO2 emissions from trucks. Organic Rankine cycle (ORC) systems show the highest potential for this application, but still lack efficient small-scale expansion devices, in practice. A novel tur ...

2021

Nonlinear study on a rigid rotor supported by herringbone grooved gas bearings: Theory and validation

Jürg Alexander Schiffmann, Patrick Hubert Wagner, Philipp Kaspar Bättig, Wanhui Liu

The nonlinear behavior of a rigid rotor supported by herringbone grooved journal gas bearings (HGJBs) was investigated in this study. The two-dimensional narrow groove theory (2D-NGT) was adopted to model the HGJBs. A set of integrated rotor-bearing state ...

2021

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.