MSE-360: Polymer science + TP

Summary

Introduction à la physique des polymères et aux liens entre structures chimiques et propriétés macroscopiques, avec accent sur la morphologie et le comportement thermomécanique. Méthodes de mise en œuvre, fournissant les bases nécessaires à la sélection des polymères dans un contexte industriel.

Official source

https://edu.epfl.ch/coursebook/en/polymer-science-tp-MSE-360

Moodle Page

http://go.epfl.ch/MSE-360

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Instructors (2)

Lectures in this course (25)

Related concepts (112)

Related courses (9)

Related MOOCs (5)

John Christopher Plummer

ÉCOLE POLYTECHNIQUE FÉDÉRALE DE LAUSANNE (EPFL), Lausanne, Switzerland 1989- Collaborateur Scientifique/Chargé de Cours (Lecturer) (1998-) Privat Docent (1998) Laboratoire de Technologie des Composites et Polymères (LTC) (2000-) Laboratoire de Polymères (LP) (1998-2000) UNIVERSITY OF MICHIGAN (UMICH), Ann Arbor, MI, USA 1995-1996 Visiting Scientist, Department of Materials Science and Engineering (DMSE) UNIVERSITY OF CAMBRIDGE, Cambridge, UK 1986-1989 Research Assistant, Physics and Chemistry of Solids Group (PCS), Department of Physics UNIVERSITY OF CAMBRIDGE, Cambridge, UK, Department of Materials 1986 PhD, "Flux Pinning in Type-II Superconductors" UNIVERSITY OF CAMBRIDGE, Cambridge, UK, 1982 BA/MA Honours Degree in Natural Sciences Awards Prix R&R Haenny, 2007, DuPont Research Award, 2003, Commendation, British Polymer Group, Reading 1989 RECENT PUBLICATIONS Ramier J, Da Costa N, Plummer CJG, Leterrier Y, Manson JAE, Eckert R, Gaudiana R, Cohesion and adhesion of nanoporous TiO2 coatings on titanium wires for photovoltaic applications, Thin solid films, 516, 1913 (2008). Ramier J, Plummer CJG, Leterrier Y, Manson JAE, Eckert B, Gaudiana R, Mechanical integrity of dye-sensitized photovoltaic fibers, Renewable energy, 33, 314 (2008).

Houphouet-Boigny C, Plummer CJG, Wakeman MD, Manson JAE, Hybrid glass fiber-reinforced thermoplastic nanocomposites, J. Thermoplast. Comp. Mater., 21, 103 (2008).

Ternat C, Ouali L, Sommer H, Fieber W, Velazco MI, Plummer CJG, Kreutzer G, Klok HA, Manson JAE, Herrmann, Investigation of the Release of Bioactive Volatiles from Amphiphilic Multiarm Star-Block Copolymers by Thermogravimetry and Dynamic Headspace Analysis, Macromolecules 41(19), 7079 (2008). Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, Mechanical properties of highly filled latex-based polystyrene/laponite nanocomposites, Solid State Phenomena Vol. 151, 30 (2009). Plummer, CJG, Dalle Vacche, S, Houphouët-Boigny, C, Michaud, V, Månson, JAE, Hybrid Glass Mat Reinforced Polypropylene-Montmorillonite Nanocomposites, Solid State Phenomena Vol. 151, 60 (2009). Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, Highly filled polystyrenelaponite nanocomposites prepared by emulsion polymerization, European Polm. J. 45, 621 (2009). Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, Fracture mechanisms in polystyrene/laponite nanocomposites prepared by emulsion polymerization, Engineering Fracture Mechanics 76, 2846 (2009) Clausen P., Andreoni W., Curioni A., Hughs E., Plummer C.J.G. Adsorption of low-molecular-weight molecules on the surface of a sodium smectite clay: an ab initio study, Journal of Physical Chemistry C 113, 12293 (2009). Clausen P., Andreoni W., Curioni A., Hughs E., Plummer C.J.G., Water adsorption on a sodium smectite clay surface: an ab initio study, Journal of Physical Chemistry C 113, 15218 (2009). Molberg, M, Leterrier, Y., Plummer, C.J.G., Walder, C., Löwe, C., Opris, D.M., Nüesch, F.A., Bauer, S., Månson, J.-A.E., Frequency dependent dielectric and mechanical behaviour of elastomers for actuator applications, J. Appl. Phys. 106, 054112 (2009) Clausen P., Signorelli M., Schreiber A., Hughes E., Plummer CJG, Fessas D., Schiraldi A., Månson E. J.-A., Equilibrium desorption isotherms of water, ethanol, ethyl acetate and toluene on a sodium smectite clay, Journal of Thermal Analysis and Calorimetry 98, 833 (2009) Micusik, M., Bonnefond, A., Reyes, Y., Bogner, A., Chazeau, L., Plummer, C.J.G., Paulis, M., Leiza, J.R., Morphology of Polymer/Clay Latex Particles Synthesized by Miniemulsion Polymerization: Modeling and Experimental Results Macromol. React. Eng. 2010, 4, 432 (2010). Houphouet-Boigny C., Plummer CJG, Vacche SD, Michaud V, Wakeman MD, Månson E. J.-A., Hybrid Glass Mat-reinforced Polypropylene-Montmorillonite Nanocomposites, J. Comp. Mater. 44, 1975 (2010). Delabarde, C., Plummer C.J.G., Bourban, P.-E., Månson E. J.-A., Solidification behavior of PLLA/nHA nanocomposites, Comp. Sci. & Tech. 70, 1813 (2010). Plummer C.J.G., Ruggerone R., Negrete-Herrera N., Bourgeat-Lami E., Månson J.-A.E., Small Strain Mechanical Properties of Latex-Based Nanocomposite Films, Macromol. Symp. 294, 1 (2010). Dalle Vacche, S., Plummer C.J.G., Houphouet-Boigny C., Månson E. J.-A., Morphology and mechanical properties of isotactic polypropylene glass mat thermoplastic composites modified with organophilic montmorillonite, J Mater Sci 46, 2112 (2011).

Daniel Görl

Thermoforming

Thermoforming is a manufacturing process where a plastic sheet is heated to a pliable forming temperature, formed to a specific shape in a mold, and trimmed to create a usable product. The sheet, or "film" when referring to thinner gauges and certain material types, is heated in an oven to a high-enough temperature that permits it to be stretched into or onto a mold and cooled to a finished shape. Its simplified version is vacuum forming.

Coating

A coating is a covering that is applied to the surface of an object, usually referred to as the substrate. The purpose of applying the coating may be decorative, functional, or both. Coatings may be applied as liquids, gases or solids e.g. Powder coatings. Paints and lacquers are coatings that mostly have dual uses of protecting the substrate and being decorative, although some artists paints are only for decoration, and the paint on large industrial pipes is for preventing corrosion and identification e.g.

Blow molding

Blow molding (or moulding) is a manufacturing process for forming hollow plastic parts. It is also used for forming glass bottles or other hollow shapes. In general, there are three main types of blow molding: extrusion blow molding, injection blow molding, and injection stretch blow molding. The blow molding process begins with softening plastic by heating a preform or parison. The parison is a tube-like piece of plastic with a hole in one end through which compressed air can enter.

Physics

Physics is the natural science of matter, involving the study of matter, its fundamental constituents, its motion and behavior through space and time, and the related entities of energy and force. Physics is one of the most fundamental scientific disciplines, with its main goal being to understand how the universe behaves. A scientist who specializes in the field of physics is called a physicist. Physics is one of the oldest academic disciplines and, through its inclusion of astronomy, perhaps the oldest.

Rheology

Rheology (riːˈɒlədʒi; ) is the study of the flow of matter, primarily in a fluid (liquid or gas) state, but also as "soft solids" or solids under conditions in which they respond with plastic flow rather than deforming elastically in response to an applied force. Rheology is a branch of physics, and it is the science that deals with the deformation and flow of materials, both solids and liquids. The term rheology was coined by Eugene C. Bingham, a professor at Lafayette College, in 1920, from a suggestion by a colleague, Markus Reiner.