Hydraulic Construction: Design and Infrastructure

This lecture covers the design and infrastructure of hydraulic construction, focusing on topics such as pre-sizing of concrete coverings, steep slope design goals, and the features of infrastructure for hydroelectric power stations. It also delves into the construction platform layout, equilibrium chambers, and the criteria for installation typologies. The lecture discusses the challenges of high-head installations, the variation of gallery diameters, and the influence of initial stresses on rock mass resistance. Additionally, it explores the dimensioning of concrete coatings, the importance of safety factors, and the considerations for shielded wells and galleries. The session concludes with an in-depth analysis of the design criteria, route selection, and the critical aspects of rock cover and pressure in hydraulic projects.

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related lectures (28)

Related concepts (49)

La conception générale et l'agencement des différentes infrastructures et batteries hydroélectriques, avec le dimensionnement de leurs ouvrages hydrauliques principaux.

Pumped-storage hydroelectricity

Pumped-storage hydroelectricity (PSH), or pumped hydroelectric energy storage (PHES), is a type of hydroelectric energy storage used by electric power systems for load balancing. The method stores energy in the form of gravitational potential energy of water, pumped from a lower elevation reservoir to a higher elevation. Low-cost surplus off-peak electric power is typically used to run the pumps. During periods of high electrical demand, the stored water is released through turbines to produce electric power.

Grid energy storage

Grid energy storage (also called large-scale energy storage) is a collection of methods used for energy storage on a large scale within an electrical power grid. Electrical energy is stored during times when electricity is plentiful and inexpensive (especially from intermittent power sources such as renewable electricity from wind power, tidal power and solar power) or when demand is low, and later returned to the grid when demand is high, and electricity prices tend to be higher.

Energy storage

Energy storage is the capture of energy produced at one time for use at a later time to reduce imbalances between energy demand and energy production. A device that stores energy is generally called an accumulator or battery. Energy comes in multiple forms including radiation, chemical, gravitational potential, electrical potential, electricity, elevated temperature, latent heat and kinetic. Energy storage involves converting energy from forms that are difficult to store to more conveniently or economically storable forms.

Battery storage power station

A battery storage power station is a type of energy storage power station that uses a group of batteries to store electrical energy. Battery storage is the fastest responding dispatchable source of power on electric grids, and it is used to stabilise those grids, as battery storage can transition from standby to full power in under a second to deal with grid contingencies. Battery storage power stations are generally designed to be able to output at their full rated power for several hours.

Hydraulic machinery

Hydraulic machines use liquid fluid power to perform work. Heavy construction vehicles are a common example. In this type of machine, hydraulic fluid is pumped to various hydraulic motors and hydraulic cylinders throughout the machine and becomes pressurized according to the resistance present. The fluid is controlled directly or automatically by control valves and distributed through hoses, tubes, or pipes.

Hydraulic Construction Platform CIVIL-412: Hydraulic and hydroelectric structures and schemes

Explores hydraulic construction platforms, water intake design, and vortex formation mitigation in reservoirs and lakes.

Hydraulic Construction Platform: Geotechnical Aspects CIVIL-412: Hydraulic and hydroelectric structures and schemes

Explores geotechnical aspects of a hydraulic construction platform, covering internal pressure, construction costs, water losses, and coating impact.

Hydraulic Construction: Evacuation Systems CIVIL-412: Hydraulic and hydroelectric structures and schemes

Explores the design and purpose of hydraulic evacuation systems and the importance of hydraulic modeling for safety.

Hydropower Infrastructure: Pumped Storage Facilities CIVIL-412: Hydraulic and hydroelectric structures and schemes

Explores the infrastructure and operation of pumped storage facilities for hydropower, focusing on the Swiss context and the challenges and future developments in the field.

Hydropower Infrastructure: Design and Layout CIVIL-412: Hydraulic and hydroelectric structures and schemes

Explores the design and layout of hydropower infrastructure, including turbine types and storage possibilities.