This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
A magnetic field is a vector field that describes the magnetic influence on moving electric charges, electric currents, and magnetic materials. A moving charge in a magnetic field experiences a force perpendicular to its own velocity and to the magnetic field. A permanent magnet's magnetic field pulls on ferromagnetic materials such as iron, and attracts or repels other magnets.
An electromagnet is a type of magnet in which the magnetic field is produced by an electric current. Electromagnets usually consist of wire wound into a coil. A current through the wire creates a magnetic field which is concentrated in the hole in the center of the coil. The magnetic field disappears when the current is turned off. The wire turns are often wound around a magnetic core made from a ferromagnetic or ferrimagnetic material such as iron; the magnetic core concentrates the magnetic flux and makes a more powerful magnet.
A power outage (also called a powercut, a power out, a power failure, a power blackout, a power loss, or a blackout) is the loss of the electrical power network supply to an end user. There are many causes of power failures in an electricity network. Examples of these causes include faults at power stations, damage to electric transmission lines, substations or other parts of the distribution system, a short circuit, cascading failure, fuse or circuit breaker operation.
This paper presents a general analytical model for predicting the magnetic field of slotless permanent-magnet machines. The model takes into account the effect of eddy currents in conductive regions a
This paper presents a very-high-speed (VHS) slotless permanent-magnet motor design procedure using an analytical model. The model is used to design the optimal prototype (target: 200 kr/min, 2 kW). Th
Institute of Electrical and Electronics Engineers2010
,
This paper presents a very-high-speed (VHS) slotless permanent-magnet motor design procedure using an analytical model. The model is used to design the optimal prototype (target: 200 kr/min, 2 kW). Th