Jesus Moreno Quiben

This person is no longer with EPFL

Related publications (11)

About
Privacy
Disclaimer

Graph Chatbot

New prediction methods for CO2 evaporation inside tubes: Part I - A two-phase flow pattern map and a flow pattern based phenomenological model for two-phase flow frictional pressure drops (vol 51, pg 111, 2008)

John Richard Thome, Jesus Moreno Quiben

Elsevier2012

Ammonia two-phase flow in a horizontal smooth tube: Flow pattern observations, diabatic and adiabatic frictional pressure drops and assessment of prediction methods

John Richard Thome, Jesus Moreno Quiben, Ricardo Lima

The present study illustrates new experimental two-phase flow pattern observations together with diabatic boiling and adiabatic two-phase frictional pressure drop results for ammonia (R7117) flowing inside a 14-mm internal diameter, smooth horizontal stain ...

2009

Flow boiling in horizontal smooth tubes: New heat transfer results for R-134a at three saturation temperatures

John Richard Thome, Jesus Moreno Quiben, Ricardo Lima

The present study presents new flow boiling heat transfer results of R-134a flowing inside a 13.84 mm internal diameter, smooth horizontal copper tube. The heat transfer measurements were made over a wide range of test conditions: saturation temperatures o ...

2009

Flow boiling in horizontal flattened tubes: Part I – Two-phase frictional pressure drop results and model

John Richard Thome, Jesus Moreno Quiben, Ricardo Lima

Experiments of diabatic two-phase pressure drops in flow boiling were conducted in four horizontal flattened smooth copper tubes with two different heights of 2 and 3 mm. The equivalent diameters of the flat tubes are 8.6, 7.17. 6.25, and 5.3 mm. The worki ...

2009

Flow boiling in horizontal flattened tubes: Part II – Flow boiling heat transfer results and model

John Richard Thome, Jesus Moreno Quiben, Ricardo Lima

Experiments of flow boiling heat transfer were conducted in four horizontal flattened smooth copper tubes of two different heights of 2 and 3 mm. The equivalent diameters of the flattened tubes are 8.6, 7.17, 6.25, and 5.3 mm. The working fluids were R22 a ...

2009

New Prediction Methods for CO2 Evaporation inside Tubes: Part I - A Two-Phase Flow Pattern Map and a Flow Pattern Based Phenomenological Model for Two-Phase Flow Frictional Pressure Drops

John Richard Thome, Jesus Moreno Quiben

2008

Effect of Local Hot Spots on the Maximum Heat Transfer during Flow Boiling in a Microchannel

John Richard Thome, Rémi Revellin, Jesus Moreno Quiben

Institute of Electrical and Electronics Engineers2008

Flow pattern based two-phase frictional pressure drop model for horizontal tubes, Part II: New phenomenological model

John Richard Thome, Jesus Moreno Quiben

This work presents an analytical investigation of two-phase pressure drops during evaporation in horizontal tubes. Based on a comprehensive state-of-the-art review and comparison with two-phase frictional pressure drop prediction methods, it is proven that ...

2007

Flow pattern based two-phase frictional pressure drop model for horizontal tubes. Part I: Diabatic and adiabatic experimental study

John Richard Thome, Jesus Moreno Quiben

The reliable prediction of pressure drop in two-phase flow is an important prerequisite to accurate optimization of thermal systems. Because of the complexity of these types of flow, empirical or semiempirical relationships are only of limited reliability ...

2007