Multimetal oxyhydroxides have recently been reported that outperform noble metal catalysts for oxygen evolution reaction (OER). In such 3d-metal-based catalysts, the oxidation cycle of 3dmetals has been posited to act as the OER thermodynamic-limiting proc ...
For pencil beam scanned (PBS) proton therapy, analytical dose calculation engines are still typically used for the optimisation process, and often for the final evaluation of the plan. Recently however, the suitability of analytical calculations for planni ...
Being good structural replacement for other conventional material, the pultruded glass fiber reinforced polymer (GFRP) profiles are being increasingly used in civil engineering structures. The connection between components is considered the most suspect ar ...
Adhesively-bonded joints, including double- and stepped- lap joints (DLJs and SLJs), were experimentally investigated under cyclic tensile loading. The joints were composed of pultruded GFRP laminates and epoxy adhesive. A critical stiffness was found for ...
Adhesively bonded joints are being used increasingly in civil engineering structures, especially for joints comprising pultruded glass fiber reinforced polymer (GFRP) laminates. The layered material architecture, however, leads to a complex delamination fa ...
The fatigue response of adhesively-bonded pultruded GFRP double-lap joints has been investigated under different environmental conditions. Tests were performed at -35 °C, 23 °C and 40 °C. A fourth set of fatigue data was collected from tests on preconditio ...