Publications by Henning Lübbe

Three-dimensional microstructural mapping of poisoning phases in the Neodymium Nickelate solid oxide fuel cell cathode

Jan Van Herle, Josef Andreas Schuler, Henning Lübbe, Jun Wang

Nd-Nickelate (NNO), Nd1.95NiO4+delta, an alternative solid oxide fuel cell cathode material, has been imaged and mapped in 3D using synchrotron-based x-ray nanotomography. The NNO cathode material, which suffered from silicon contamination during fabricati ...

Elsevier Science Bv2013

Micro-tubular Solid Oxide Fuel Cells with Nickelate Cathode-support

Henning Lübbe

The shortage of natural resources, rising energy demands and global warming have created an urgent need for more efficient energy conversion devices and different energy resources to achieve a more sustainable and efficient economy. Solid Oxide Fuel Cells ...

EPFL2012

Nd-nickelate solid oxide fuel cell cathode sensitivity to Cr and Si contamination

Jan Van Herle, Aïcha Hessler-Wyser, Josef Andreas Schuler, Henning Lübbe

The stability of Nd-nickelate, considered as an alternative solid oxide fuel cell (SOFC) cathode material, was evaluated in this work on its tolerance towards contaminants. ...

Elsevier2012

Design of experiment approach applied to reducing and oxidizing tolerance of anode supported solid oxide fuel cell. Part II: Electrical, electrochemical and microstructural characterization of tape-cast cells

Jan Van Herle, Aïcha Hessler-Wyser, Marco Cantoni, Stefan Diethelm, Antonin Faes, Zacharie Wuillemin, Pietro Tanasini, Henning Lübbe, Nicola Accardo

One of the major limitations of the nickel (Ni) - yttria-stabilized zirconia (YSZ) anode support for solid oxide fuel cells (SOFC) is its low capability to withstand transients between reducing and oxidizing atmospheres ("RedOx" cycle), owing to the Ni-to- ...

Elsevier2011

Cathode-supported micro-tubular SOFCs based on Nd1.95NiO4 + δ: Fabrication and characterisation of dip-coated electrolyte layers

Jan Van Herle, Heinrich Hofmann, Paul Bowen, Josef Andreas Schuler, Ulrich Aschauer, Henning Lübbe

Fabrication conditions to obtain dense electrolyte double layers on a porous micro-tubular cathode substrate were investigated. Porous tubes of a nickelate material, Nd1.95NiO4 + δ, were fabricated by cold-isostatic pressing (CIP) and sintering. Thin ﬁlms ...

2009