Skip to main content

Search

Show all results for

Home

Person

Akshath Raghu Shetty

This person is no longer with EPFL

About
Privacy
Disclaimer

Copyright © 2025 EPFL, all rights reserved

Graph Chatbot

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related publications (7)

Please note that this is not a complete list of this person’s publications. It includes only semantically relevant works. For a full list, please refer to Infoscience.

Impact of the Oxygen Flow during the Magnetron Sputtering Deposition on the Indium Tin Oxide thin films for Silicon Heterojunction Solar Cell

Christophe Ballif, Mathieu Gérard Boccard, Jan Haschke, Jean Cattin, Brahim Aissa, Akshath Raghu Shetty

We report on the optoelectronic properties of ITO layers deposited by DC sputtering, using different oxygen to total flow ratios [r(O-2) = O-2/Ar, ranging from 1% to 8%], for silicon heterojunction (SHJ) solar cell application. The depth profiling of the v ...

IEEE2019

Formation of (113) texture in fcc nitride thin films and its influence on the film properties

Ayat Karimi, Alireza Karimi, Akshath Raghu Shetty

This work presents a study of XRD measurements on the development of the (113) preferential orientation with film thickness for Ti0.67Al0.33N films grown on Si(100) substrates by pulsed DC magnetron sputtering. The buildup of (113) texture was observed usi ...

Elsevier Science Sa2013

Impact of the Oxygen Content on the Optoelectronic Properties of the Indium-Tin-Oxide Based Transparent Electrodes for Silicon Heterojunction Solar Cells

Christophe Ballif, Mathieu Gérard Boccard, Jan Haschke, Jean Cattin, Brahim Aissa, Akshath Raghu Shetty

Amorphous/crystalline silicon heterojunction (SHJ) solar cells technology is attracting tremendous attention in recent years due to its potential to achieve high power conversion efficiencies at low fabrication temperatures and using few process steps. How ...

AMER INST PHYSICS2019