Person

Neha Arora

This person is no longer with EPFL

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related research domains (15)
Perovskite solar cell
A perovskite solar cell (PSC) is a type of solar cell that includes a perovskite-structured compound, most commonly a hybrid organic–inorganic lead or tin halide-based material as the light-harvesting active layer. Perovskite materials, such as methylammonium lead halides and all-inorganic cesium lead halide, are cheap to produce and simple to manufacture. Solar-cell efficiencies of laboratory-scale devices using these materials have increased from 3.8% in 2009 to 25.
Perovskite
Perovskite (pronunciation: pə'rɒvskaɪt) is a calcium titanium oxide mineral composed of calcium titanate (chemical formula ). Its name is also applied to the class of compounds which have the same type of crystal structure as (XIIA2+VIB4+X2−3), known as the perovskite structure. Many different cations can be embedded in this structure, allowing the development of diverse engineered materials. The mineral was discovered in the Ural Mountains of Russia by Gustav Rose in 1839 and is named after Russian mineralogist Lev Perovski (1792–1856).
Photovoltaics
Photovoltaics (PV) is the conversion of light into electricity using semiconducting materials that exhibit the photovoltaic effect, a phenomenon studied in physics, photochemistry, and electrochemistry. The photovoltaic effect is commercially used for electricity generation and as photosensors. A photovoltaic system employs solar modules, each comprising a number of solar cells, which generate electrical power. PV installations may be ground-mounted, rooftop-mounted, wall-mounted or floating.
Show more
Related publications (32)

Quantifying Stabilized Phase Purity in Formamidinium-Based Multiple-Cation Hybrid Perovskites

Michael Graetzel, Shaik Mohammed Zakeeruddin, Thomas Paul Baumeler, Mohammad Ibrahim Dar, Neha Arora

A promising approach for the production of highly efficient and stable hybrid perovskite solar cells is employing mixed-ion materials. Remarkable performances have been reached by materials comprising a stabilized mixture of methylammonium (MA(+)) and formamidinium (FA(+)) as a monovalent cation. We compare and quantify the methods of stabilizing FA(-) based perovskites involving the additional blending of the smaller inorganic cations cesium (Cs+) and rubidium (Rb+), which can lead to an improvement in phase purity of black cubic perovskite modification. Even under excess lead iodide conditions, the presence of a separate PbI2 phase as well as hexagonal phases, which are very common for formamidinium-containing perovskites, can be drastically reduced or even completely prevented. In this aspect, adding both Cs+ and Rb+ showed greater effectivity than only adding Cs+, enabling an increase in the percentage of the cubic phase within the material from 45% in the double-cation FA:MA mixture to 97.8% in the quadruple composition. The impact of admixing inorganic cations on the perovskite crystal structure resulted in enlarged homogeneous crystallite sizes and a less pronounced orientational order and indicated also minor modifications of unit cell sizes. Finally, we discuss the impact of the phase purity on charge-carrier recombination dynamics and solar cell performance.
2021

Cyclopentadithiophene-Based Hole-Transporting Material for Highly Stable Perovskite Solar Cells with Stabilized Efficiencies Approaching 21%

Michael Graetzel, Shaik Mohammed Zakeeruddin, Yuhang Liu, Mohammad Ibrahim Dar, Gwénolé Jean Jacopin, Neha Arora, Seckin Akin, Michael Bauer, Ryusuke Uchida

There is an urge to develop new hole-transporting materials (HTMs) for perovskite solar cells (PSCs), which can yield comparable power conversion efficiencies (PCEs) yet mitigate the issue of stability associated with the state-of-the-art HTM Spiro-MeOTAD. Herein, we designed and prepared C-2v-symmetric spiro-configured HTM-1 comprising a central acridine-cyclopentadithiophene core unit flanked with triarylamine moieties. PSCs containing a 40 nm thin HTM-1 layer for hole extraction yielded a stabilized PCE approaching 21% under standard illumination. Owing to its higher hole mobility (mu(h)) at low electric field, an impressive short-circuit current density (J(SC)) of 24.7 mA cm(-2) and a high fill factor (FF) of 0.77 have been achieved. More importantly, HTM-1-based PSCs presented an excellent long-term operational stability under continuous illumination for 400 h and thermal stability at 80 degrees C, which can be ascribed to its high glass transition temperature of 168 degrees C and superior moisture tolerance. Arguably, the confluence of high performance and remarkable stability will lead to the development of technologically interesting new, stable, and efficient PSCs.
AMER CHEMICAL SOC2020

Minimizing the Trade-Off between Photocurrent and Photovoltage in Triple-Cation Mixed-Halide Perovskite Solar Cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Yuhang Liu, Thomas Paul Baumeler, Mohammad Ibrahim Dar, Neha Arora, Mojtaba Abdi Jalebi, Seckin Akin, Ryusuke Uchida

Its lower bandgap makes formamidinium lead iodide (FAPbI(3)) a more suitable candidate for single-junction solar cells than pure methylammonium lead iodide (MAPbI(3)). However, its structural and thermodynamic stability is improved by introducing a significant amount of MA and bromide, both of which increase the bandgap and amplify trade-off between the photocurrent and photovoltage. Here, we simultaneously stabilized FAPbI(3 )into a cubic lattice and minimized the formation of photoinactive phases such as hexagonal FAPbI(3) and PbI2 by introducing 5% MAPbBr(3) , as revealed by synchrotron X-ray scattering. We were able to stabilize the composition (FA(0.95)MA(0.05)Cs(0.05))Pb(I-0.95 Br-0.05)(3), which exhibits a minimal trade-off between the photocurrent and photovoltage. This material shows low energetic disorder and improved charge-carrier dynamics as revealed by photothermal deflection spectroscopy (PDS) and transient absorption spectroscopy (TAS), respectively. This allowed the fabrication of operationally stable perovskite solar cells yielding reproducible efficiencies approaching 22%.
AMER CHEMICAL SOC2020
Show more