Publications by Bo Liu | EPFL Graph Search

Performance of ITER Correction Busbar Conductor Samples CBCN2 and CBCN3

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Fang Liu, Bo Liu

The correction busbar (CB) conductors for the ITER project are being produced in China. The second China CB conductor sample (CBCN2, Phase II of conductor testing) and the third CB conductor sample (CBCN3, Phase III testing) were made of the WST NbTi stran ...

IEEE Institute of Electrical and Electronics Engineers2016

Conductor Performance of CCCN3, CCCN4 and CCCN5 Samples for ITER CC Coils

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Fang Liu, Bo Liu

The conductor for the ITER Correction Coils (CC) is manufactured in China and is tested in the SULTAN facility. The third China CC conductor for the qualification SULTAN test sample (CCCN3) was prepared from a 200 m long CC conductor unit length (Phase II) ...

IEEE Institute of Electrical and Electronics Engineers2016

Guidelines for the use and interpretation of assays for monitoring autophagy (3rd edition)

Françoise Gisou van der Goot Grunberg, Maurizio Molinari, Yi Sun, Chong Liu, Giuseppe Russo, Jian Wang, Peng Wang, Wei Chen, Darren Moore, Li Zhang

Taylor & Francis Inc2016

DC Performance Results Versus Assessment of ITER Main Busbar NbTi Conductors

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Rainer Wesche, Bo Liu

Four ITER main busbar (MB) conductor samples were tested in the SULTAN test facility (Centre de Recherches en Physique des Plasma, Ecole Polytechnique Fédérale de Lausanne, Switzerland) between 2011 and 2013. The MB conductors are NbTi-based cable-in-condu ...

IEEE Institute of Electrical and Electronics Engineers2015

Molecular Engineering of Pyrido[3,4-b]pyrazine-Based Donor-Acceptor-pi- Acceptor Organic Sensitizers: Effect of Auxiliary Acceptor in Cobalt- and Iodine-Based Electrolytes

Michael Graetzel, Shaik Mohammed Zakeeruddin, Jean-David Décoppet, Fabrizio Giordano, Bo Liu

Due to the ease of tuning its redox potential, the cobalt-based redox couple has been extensively applied for highly efficient dye-sensitized solar cells (DSSCs) with extraordinarily high photovoltages. However, a cobalt electrolyte needs particular struct ...

Wiley-Blackwell2015

A New Fullerene-Free Bulk-Heterojunction System for Efficient High-Voltage and High-Fill Factor Solution-Processed Organic Photovoltaics

Wolfgang Richard Tress, Fei Zhang, Bo Liu

Small molecule donor/polymer acceptor bulk-heterojunction films with both compounds strongly absorbing have great potential for further enhancement of the performance of organic solar cells. By employing a newly synthesized small molecule donor with a comm ...

Wiley-Blackwell2015

The performance test and analysis of the third and fourth China PF conductor for ITER

Pierluigi Bruzzone, Boris Stepanov, Bo Liu

The third Chinese PF conductor for ITER PF5 (PFCN3) and the fourth Chinese PF conductor for ITER PF2/3/4 (PFCN4) conductor in Phase II were manufactured in ASIPP and tested in the SULTAN facility. This paper introduces the PFCN3 and PFCN4 sample manufactur ...

Elsevier2014

Conductor Performance of TFCN4 and TFCN5 Samples for ITER TF Coils

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Fang Liu, Bo Liu

The fourth China TF conductor sample (TFCN4) for Phase II, the left leg of the fifth China TF conductor sample (TFCN5) for Phase III, as well as the right leg of the TFCN5 conductor for Phase IV, were made of the WST strands, cabled by Baosheng, jacketed a ...

IEEE Institute of Electrical and Electronics Engineers2014

Manufacture of ITER feeder sample conductors

Pierluigi Bruzzone, Bo Liu, Hongwei Li

The ITER feeders are the components that connect the ITER magnet systems located inside the main cryostat to the cryogenics, power-supply and control system interfaces outside the cryostat. The feeder busbars rely on the Cable-In-Conduit Conductor (CICC) d ...

Elsevier Science Sa2013

The performance test and analysis of ITER Main and Correction Busbar conductor

Pierluigi Bruzzone, Boris Stepanov, Bo Liu

The first ITER Main Busbar (MBCN1) and Correction Busbar (CBCN1) conductor samples were manufactured in ASIPP and tested in the SULTAN facility. This paper introduces the sample manufacture, including strand, cabling, jacketing and sample preparation, and ...

Elsevier Science Sa2013