Jaeki Jeong | EPFL Graph Search

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Formate as Anti-Oxidation Additives for Pb-Free FASnI(3) Perovskite Solar Cells

Jaeki Jeong, Jinhyun Kim, Jiyoun Seo

Pb-free Sn-based perovskite solar cells (PSCs) have significant potential for application in photovoltaic devices because oftheir suitable bandgap, low exciton binding energy, high carrier mobility, and long diffusion length. However, their performance is hampered by several issues. Sn-based perovskites are highly susceptible to oxidation, which induces a high concentration of defects and degrades the chemical stability of the perovskite crystals. Herein, the anion formate (HCOO-) can effectively suppress the oxidation of Sn in the pure formamidinium tin triiodide (FASnI(3)) perovskite without using A-site cationic additives. Moreover, the presence of formate results in a uniform pinhole-free perovskite film with a low trap density, reduced charge carrier recombination, and improved charge extraction. Density functional theory calculations show that formate-treated FASnI(3) has improved stability against oxidative Sn degradation. The formate-treated PSC achieves a power conversion efficiency of 12.11% at a high open-circuit voltage of 0.71 V. The device exhibits improved stability in ambient air in which it maintained over 80% of its initial power conversion efficiency after 180 min because oxidation is inhibited owing to the strong interaction between Sn and formate.

WILEY-V C H VERLAG GMBH2022

Pseudo-halide anion engineering for alpha-FAPbI3 perovskite solar cells

Jaeki Jeong, Haizhou Lu, Jiyoun Seo

Metal halide perovskites of the general formula ABX3—where A is a monovalent cation such as caesium, methylammonium or formamidinium; B is divalent lead, tin or germanium; and X is a halide anion—have shown great potential as light harvesters for thin-film photovoltaics1,2,3,4,5. Among a large number of compositions investigated, the cubic α-phase of formamidinium lead triiodide (FAPbI3) has emerged as the most promising semiconductor for highly efficient and stable perovskite solar cells6,7,8,9, and maximizing the performance of this material in such devices is of vital importance for the perovskite research community. Here we introduce an anion engineering concept that uses the pseudo-halide anion formate (HCOO−) to suppress anion-vacancy defects that are present at grain boundaries and at the surface of the perovskite films and to augment the crystallinity of the films. The resulting solar cell devices attain a power conversion efficiency of 25.6 per cent (certified 25.2 per cent), have long-term operational stability (450 hours) and show intense electroluminescence with external quantum efficiencies of more than 10 per cent. Our findings provide a direct route to eliminate the most abundant and deleterious lattice defects present in metal halide perovskites, providing a facile access to solution-processable films with improved optoelectronic performance.

2021

Ultrafast carbothermal reduction of silica to silicon using a CO2 laser beam

Jaeki Jeong

We report the extraction of silicon via a carbothermal reduction process using a CO2 laser beam as a heat source. The surface of a mixture of silica and carbon black powder became brown after laser beam irradiation for a few tens of seconds, and clear peaks of crystalline silicon were observed by Raman shift measurements, confirming the successful carbothermal reduction of silica. The influence of process parameters, including the laser beam intensity, radiation time, nitrogen gas flow in a reaction chamber, and the molar ratios of silica/carbon black of the mixture, on the carbothermal reduction process is explained in detail.

NATURE RESEARCH2020