Factors affecting subject-specific finite element models of implant-fitted rat bone specimens: critical analysis of a technical protocol

Related publications (31)

About
Privacy
Disclaimer

Graph Chatbot

Determining crack kinematics from imaged crack patterns

Katrin Beyer, Bryan German Pantoja Rosero, Amir Rezaie, Ketson Roberto Maximiano Dos Santos

Determining the relationship between the cause of damage and the subsequent structural behavior of infrastructure systems requires an accurate characterization of the propagation of cracks, which represents the evolution of the damage state. When no inform ...

2022

Overcorrected Implants for Total Shoulder Arthroplasty

Yasmine Boulanaache

Glenohumeral osteoarthritis is a degenerative shoulder joint disease, which causes the breakdown of articular cartilage and bone. People affected by this disease suffer from severe pain and eventually reduced mobility and poor life quality. This disease is ...

EPFL2021

Roadmap toward the 10 ps time-of-flight PET challenge

Edoardo Charbon, Mathieu Benoit, Christian Morel, Joao Varela

Since the seventies, positron emission tomography (PET) has become an invaluable medical molecular imaging modality with an unprecedented sensitivity at the picomolar level, especially for cancer diagnosis and the monitoring of its response to therapy. Mor ...

IOP PUBLISHING LTD2020

Image Clustering Algorithms to Identify Complicated Cerebral Diseases. Description and Comparison

Maria-Alexandra Paun

This article presents two algorithms developed based on two different techniques, from clusterization theory, namely k-means clustering technique and Fuzzy C-means technique, respectively. In this context, the study offers a sustained comparison of the two ...

2020

Micrometer-resolution X-ray tomographic full-volume reconstruction of an intact post-mortem juvenile rat lung

Goran Lovric, Marco Stampanoni, Anders Larsson

In this article, we present an X-ray tomographic imaging method that is well suited for pulmonary disease studies in animal models to resolve the full pathway from gas intake to gas exchange. Current state-of-the-art synchrotron-based tomographic phase-con ...

SPRINGER2021

Propagation of fluid driven fractures in transversely isotropic material

Fatima-Ezzahra Moukhtari

The propagation of fluid driven fractures is used in a number of industrial applications (well stimulation of unconventional reservoirs, development of deep geothermal systems) but also occurs naturally (magmatic dyke intrusion). While the mechanics of hyd ...

EPFL2020

Finite Element Modeling of Tight Elastic Knots

Pedro Miguel Nunes Pereira de Almeida Reis, Tomohiko Sano, Paul Johanns, Changyeob Baek, Paul Grandgeorge

We present a methodology to simulate the mechanics of knots in elastic rods using geometrically nonlinear, full three-dimensional (3D) finite element analysis. We focus on the mechanical behavior of knots in tight configurations, for which the full 3D defo ...

2020

Glenoid bone strain after anatomical total shoulder arthroplasty: In vitro measurements with micro-CT and digital volume correlation

Dominique Pioletti, Alexandre Terrier, Alain Farron, Yasmine Boulanaache

Glenoid implant loosening remains a major source of failure and concern after anatomical total shoulder arthroplasty (aTSA). It is assumed to be associated with eccentric loading and excessive bone strain, but direct measurement of bone strain after aTSA i ...

2020

Mixed-mode fracture response of anti-symmetric laminates: Experiments and modelling

John Botsis

Multidirectional laminates are very often used in advanced structures. However, the existing data in the literature regarding their fracture response is not conclusive. In this work, the fracture response of a +45 degrees// -45 degrees interface is investi ...

ELSEVIER SCI LTD2020

The use of texture-based radiomics CT analysis to predict outcomes in early-stage non-small cell lung cancer treated with stereotactic ablative radiotherapy

Adrien Raphaël Depeursinge, Pierre Starkov

Objective: Stereotactic ablative radiotherapy (SABR) is being increasingly used as a non-invasive treatment for early-stage non-small cell lung cancer (NSCLC). A non-invasive method to estimate treatment outcomes in these patients would be valuable, especi ...

BRITISH INST RADIOLOGY2019

Page 2 of 4

Glenoid bone strain after anatomical total shoulder arthroplasty: In vitro measurements with micro-CT and digital volume correlation

Dominique Pioletti, Alexandre Terrier, Alain Farron, Yasmine Boulanaache

2020

The use of texture-based radiomics CT analysis to predict outcomes in early-stage non-small cell lung cancer treated with stereotactic ablative radiotherapy

Adrien Raphaël Depeursinge, Pierre Starkov

BRITISH INST RADIOLOGY2019

Mixed-mode fracture response of anti-symmetric laminates: Experiments and modelling

John Botsis

ELSEVIER SCI LTD2020