Study of cementitious materials using transmission electron microscopy
Related publications (42)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Thermodynamic modeling is a versatile tool for predicting the chemical composition cement during the hydration of cement. The quality of the thermodynamic modeling depends directly on the quality and completeness of thermodynamic database used. One of the ...
This thesis investigates the replacement of Portland cement by addition of high amounts of calcined clays and limestone. Such ternary blends can become more ecological and economical binders to answer the worldwide housing shortage. It could be demonstrate ...
The long-term expansion of calcium aluminate cement and calcium sulfoaluminate cement in the presence of added gypsum has been studied for samples cured under water. Progressively higher amounts of gypsum were added to the CAC or CSA and it was found that ...
The modeling platform µic has been extended to study the hydration of cement based systems. It is shown that the hydration kinetics of alite can be described through the implementation of two mechanisms: a solution controlled dissolution (SCD) mechanism fo ...
Addition of fine limestone provides an excellent means to reduce the amount of clinker in cement. It is now well accepted that limestone partially reacts in cementitious systems with C3A to produce hemi- and monocarboaluminate phases and as a consequence m ...
In this study synchrotron X-ray absorption spectroscopy (XAS) has been applied, an element specific technique which allows Fe-containing phases to be identified in the complex mineral mixture of hydrated cements. Several Fe species contributed to the overa ...
Calcium aluminate cements (CAC) are often used in combination with calcium sulfate and Portland cement for special applications where rapid setting, rapid drying and shrinkage compensation are required. A growing fraction of the clinker, which has the high ...
This paper focuses on the interactions that occur between cement phases during early hydration, especially between the hydration of alite and C(3)A-gypsum. This study shows that alite reaction is accelerated in the presence of gypsum. This acceleration was ...
The kinetics of hydration of cementitious materials is sensitive to the mixing procedure. High shear mixing conditions lead to an increase in the kinetics of hydration at early age compared to low shearing conditions such as hand mixing. In this study the ...
Some of the limitations of the model recently used by Nicoleau in a recent article [Accelerated growth of calcium silicate hydrates: experiments and simulations, Cement Concr. Res. 21 (2011) 1339 - 1348.] are discussed. (C) 2012 Elsevier Ltd. All rights re ...