Analysis of large scale hydrodynamic phenomena in turbine draft tubes
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Impact load measurements were carried out in a high-speed cavitation loop by means of a conventional pressure sensor flush-mounted in the region of closure of the cavity where maximum damage was observed. The sensor was dynamically calibrated by the ball d ...
The flow hydrodynamics in a low specific speed radial pump-turbine reduced scale model is experimentally investigated under off-design operating conditions in generating mode. Wall pressure measurements, in the stator, synchronized with high-speed flow vis ...
International Association For Hydraulic Research2010
In hydro turbine design, fluid-structure interaction (FSI) may play an important role. Examples are flow induced inertia and damping effects, vortex induced vibrations in the lock-in vicinity, or hydroelastic instabilities of flows in deforming gaps (e.g. ...
Velocity fields in rectangular shallow reservoirs with different length-to-width and expansion ratios were investigated in an experimental study, to evaluate the effect of geometry on the flow field. A wide range of combinations of these two non-dimensiona ...
The present work is a contribution to the physical analysis and numerical simulation of the pressure surges in hydraulic machinery and connected conduit systems. Localized hydrodynamic instabilities including cavitation are prone to interact with the entir ...
In pipe systems, pressure and flow fluctuations below cutoff frequency propagate as plane waves along pipes. Depending on the pipe length and propagation velocity, resonance leading to high amplitude pressure fluctuation may occur. At low pressure, cavitat ...
We introduce and validate a novel mathematical model for computing the radial profiles of both axial and circumferential velocity components, respectively, of the swirling flow exiting the runner of hydraulic turbines within the full operating range. We as ...
Hydrodynamic models are important tools in civil and environmental engineering. When properly calibrated, numerical flow simulations are helpful to study the impact of floods as natural hazards for the built environment, or as inundation dynamics connectin ...
River and open-channel flows present complex three-dimensional (3D) structures in the water column and on the surface as a result of the existence of secondary currents driven by either centrifugal force or turbulence. This paper experimentally investigate ...
In order to unravel the main flow and secondary flow characteristics and the role of turbulence in a curved single-bend open-channel flow, large-eddy simulations (LES) and Reynolds-averaged numerical simulations (RANS) were carried out and compared with ex ...