Void Formation And Transport During SMC Manufacturing: Effect Of The Glass Fibre Sizing
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In composite processing, a compressible dry fiber preform is in many cases impregnated by a molten polymeric matrix. The impregnated part is sometimes used as produced, but most often it requires a reheating step before stamping, flow molding or even paint ...
The correlation between sizing formulation, bundle mechanical characteristics, and bundle-matrix static and dynamic interactions are investigated. Two glass-fiber sizing formulations are considered, one containing polyvinyl acetate (PVAc) and the other pol ...
The effect of sizing on bending rigidity in fibre bundles was investigated. Particular attention was paid to the effect of film formers and anti-static agents on the behaviour of glass fibre bundles under forced packing conditions. The bending rigidity of ...
Unsaturated Polyester (UP) resins are extensively used as a matrix for the production of composites due to their low cost and versatility. Their significant polymerization shrinkage has however a negative impact on the dimensional stability of the molded p ...
In automotive engineering, the main load bearing structure (Body-in-White, BIW) has traditionally been manufactured using metals such as steel and light alloys. In order to satisfy upcoming European regulations on CO2 emissions, considerable weight reducti ...
Liquid composite moulding of Lactam 12 monomer and activating system (APLC12) into satin weave carbon fabrics is investigated, with emphasis on minimising the void content in the final part. The main sources for void formation are identified. The solidific ...
The parameters affecting the packing stress of fiber mats for melt impregnation, resin transfer molding and compression molding are systematically investigated. An analytical equation based on local bending of fibers, which was previously derived for non-i ...
Electrical resistance in carbon-fiber reinforced polymers has been shown experimentally to be a sensitive measure of internal damage. To quantify the dependence of electrical resistance on mechanical fiber damage at the micromechanical level, a numerical e ...
Stress changes in hydrogenated phosphorous-doped fibers after Bragg grating inscription have been measured. Fibers with three different drawing tensions have been investigated. The core stress was found to increase independently of the initial stress state ...
The potential of pulp fiberreinforced thermoplastics is currently not fully explored in composites. One of the main reasons is that pulp fibers are extracted for the use in papermaking and are thus not optimized for use as reinforcements in thermoplastics ...
