Methodology for Risk Assessment of Part Load Resonance in Francis Turbine Power Plant
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
At this time, a large number of hydraulic turbomachinery installations are ageing, so that they need refurbishement to increase their efficiency and their associated output power. The items that need refurbishement are mainly the runner and the guide vanes ...
GE Energy Hydro has developed a new procedure for the CFD analysis of the unsteady rotor-stator interaction between the wicket gates and runner blades of Francis turbines. The results from the CFD calculations have been successfully validated by means of h ...
This paper describes vibration analysis techniques that have been adapted and used to classify cavitation in a model Francis turbine. This analysis can be used to compliment standard cavitation tests. Cavitation can be classified in various ways using vibr ...
International Association For Hydraulic Research2002
Design, operation and refurbishment of hydraulic turbines, pumps or pump-turbine are strongly related to cavitation flow phenomena, which may occur in either the rotating runner-impeller or the stationary parts of the machine. The paper presents the cavita ...
To characterize the boundary layer development, in the cone of the Francis turbine, wall friction and velocity measurements are performed. The mean wall friction measurements evidence the increasing risk of the boundary layer separation at the cone wall wi ...
International Association For Hydraulic Research2004
The parallel rotor-stator computation capabilities of Fine Turbo and CFX-TASCflow CFD commercial codes have been investigated within the frame of the European ESPRIT project HPNURSA. Unsteady computations have been performed for simple test cases, where fl ...
International Association For Hydraulic Research2002
An analytical approach allowing modelling transient phenomena in pipes, valves, surge tanks and Francis turbines based on impedance method is developed. These models are implemented in a software called “SIMSEN”, which simulates the behaviour of complex ap ...
International Association For Hydraulic Research2002
An analytical approach allowing modelling transient phenomena in pipes, valves, surge tanks and Francis turbines based on impedance method is developed. These models are implemented in a software called “SIMSEN”, which simulates the behaviour of complex ap ...
A common phenomenon in Francis turbines is draft tube surge. In these fixed-bladed machines, a strong runner outlet swirl can develop under off-design conditions. The action of the diffuser, and in particular the draft tube elbow, on the rotating flow fiel ...
Hydraulic turbine runners, which operate under a wide range of heads and outputs, are subjected to considerable dynamic forces at off design conditions. Therefore a detailed knowledge of mean and fluctuating pressures is required for a safe design of the r ...
International Association For Hydraulic Research2000
