Optimal design and steady-state operation of micro power generation employing fuel cells
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This paper presents the optimal design and operation of a micro power generation process that consists of a reactor, a solid-oxide fuel cell (SOFC) and two burners in a stack fed with ammonia and butane fuels. Hydrogen is produced from ammonia decompositio ...
A model Ni-Bi system has been used to investigate intergranular penetration (IGP) phenomenon. All experiments have been done on Ni 26° bicrystal at 700°C using bismuth vapour condensation as a source of liquid bismuth. Such a procedure results at room ...
Novel micro-structured string-reactor designed as catalytically active wires placed in parallel into a tube was developed. The small diam. of the channels (.apprx.100 mm) leads to a short radial diffusion time, a narrow residence time distribution, and a l ...
The aim of this Note is to predict by means of large eddy simulations the three-dimensional structures and secondary mass and heat fluxes which develop within a heated curved duct, for applications to rocket engines cooling channels. We show the existence ...
Polymer electrolyte and solid oxide are the two fuel cell types (PEFC, SOFC) under development in Switzerland. The very distinct operating temperatures of 80 °C (PEFC) and 800–950 °C (SOFC) impose fundamentally different requirements upon the nature of the ...
This study reports on the combination of solid oxide fuel cell (SOFC) generators fueled with biogas as renewable energy source, recoverable from wastes but at present underexploited. From a mobilisable near-future potential in the European Union (EU-15) of ...
Results concerning the coupling of the steam reforming and total oxidn. of methanol in a two-passage reactor are presented. A com. available copper-based catalyst is used for the steam reforming. For the total oxidn., a highly active cobalt oxide catalyst ...
The aim of this work was to operate the steam reforming of methanol and the total oxidation of methanol in a microstructured two-passage reactor. The steam reforming enables the production of hydrogen at relatively low temperatures (250 °C) with only a sma ...
A 3D simulation tool for solid oxide fuel cells is presented. The aim of this work is to predict current density, flow, temperature and concentration fields in order to compare and optimize repeat element geometry for a whole stack. A commercial CFD tool w ...
A review is given on the so-called electrochem. promotion (EP) denoting an elec. controlled modification of the activity and/or selectivity of a heterogeneous catalyst. Efficient EP in dispersed catalyst systems can be achieved using porous solid-electroly ...
