Ductile-to-brittle transition of low activation ferritic-martensitic steels with respect to critical cracks promoting final brittle fracture
Related publications (32)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In this work we have studied brittle fracture in high-chromium reduced activation tempered martensitic steels foreseen as structural materials for thermonuclear fusion reactors. Developing the adequate materials that can withstand the severe irradiation co ...
In liquid metal spallation targets such as the MEGAPIE (the megawatt pilot experiment) target and the future ADS (accelerator driven system) spallation targets, which utilize liquid lead-bismuth eutectic (LBE) as the target material, liquid metal embrittle ...
In the quest of materials for the first wall of the future fusion reactor, it has been shown that oxide dispersion strengthened (ODS) ferritic / martensitic (F/M) steels appear to be promising candidates. The inherent good mechanical properties supported b ...
As the upper temperature for use of reduced activation ferritic/martensitic steels is presently limited by a drop in mechanical strength at about 550 degrees C, Europe, Japan and the US are actively researching steels with high strength at higher operating ...
Low activation ferritic/martensitic steels are good candidates for the future fusion reactors, for, relative to austenitic steels, their lower damage accumulation and moderate swelling under irradiation by the 14 MeV neutrons produced by the fusion reactio ...
This PhD Thesis work was aimed at investigating the potentiality of tungsten-base materials as structural materials for the future thermonuclear fusion reactors in attempting to develop reduced activation tungsten-base materials with high strength and suff ...
Polymethylmethacrylate (PMMA) is used in many applications requiring good optical properties, resistance to ageing and resistance to UV irradiation, in spite of its relatively poor mechanical response to impact loading. In order to extend the range of appl ...
The fracture properties of the 9CrWVTa reduced-activation tempered martensitic steel Eurofer97 were studied in the lower ductile to brittle transition. Sub-sized pre-cracked compact tension and notched tensile specimens were tested. Finite element simu ...
The fracture properties of the 9CrWVTa reduced-activation tempered martensitic steel Eurofer97 were studied in the lower ductile to brittle transition. Sub-sized pre-cracked compact tension and notched tensile specimens were tested. Finite element simulati ...
A W-2Y material has been produced by powder metallurgy techniques including mechanical alloying of W and Y elemental powders in an argon atmosphere, followed by hot isostatic pressing of the milled powder at 1320 degrees C under a pressure of 200 MPa for 2 ...