Assessment of irradiation-hardening on Eurofer97' and Zircaloy 2 with punch tests and finite-element modeling
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Continuous-fiber ceramic matrix composites (CMCs) are of interest as hot-section components in gas turbine engines due to their refractoriness and low density relative to metallic alloys. In service, CMCs will be subjected to spatially inhomogeneous temper ...
Welding is an important joining method for the work with metals. During the welding process, the material is heated and deforms plastically which leads a change in microstructure in the heat affected zone, to complex residual stress distributions, and dist ...
Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...
The overall aim of this thesis has been to assess the potential of latex-based technologies for the preparation of polymer/clay nanocomposites. The key feature of latex-based technologies is that they offer the possibility of improved control of the final ...
This paper proposes a simple but powerful approach to determine the constitutive equation of tempered martensitic steels from micro-hardness tests. Finite element simulations were used to investigate the plastic flow in the contact region between the tip a ...
A constitutive model that couples elastic-plastic and damage theories is developed to predict the mechanical behavior of a shale from the Mont Terri rock laboratory (Opalinus Clay). The framework of continuum damage mechanics allows to predict the degradat ...
A 2-D numerical model for brittle creep and stress relaxation is proposed for the time-dependent brittle deformation of heterogeneous brittle rock under uniaxial loading conditions. The model accounts for material heterogeneity through a stochastic local f ...
High Performance Cement-based composites such as some UHPFRC or SHCC exhibit a tensile strain hardening response associated to the progressive formation of finely distributed microcracks. Strain Hardening (SH) - UHPFRC with suitable fibrous mixes have a de ...
This paper aims to analyse the anisotropic features of behaviour of Opalinus Clay using the theory of plastic multi-mechanisms. The results of triaxial tests conducted with different load levels and directions showed that the mechanical behaviour of this s ...
Micro-compression experiments were carried out on micro-pillars, with nominal diameter of 10 mu m and height 20 mu m, and fabricated from a high-chromium tempered martensitic steels developed for nuclear applications. An analytical method was proposed to c ...
