MEASUREMENT AND MODELLING OF FIBRE DISTRIBUTION AND ORIENTATION IN UHPFRC
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The strain-hardening behaviour of a tempered martensitic iron-chromium-carbon model was examined in terms of dislocation mechanics. Tensile tests of this body-centered cubic alloy were carried out from 77 up to 293 K. A specific relationship between the fl ...
Plastic deformation under uniaxial longitudinal tension and compression is investigated for pure aluminum reinforced with a high volume fraction of parallel alumina fibers. The matrix sub-structure is also examined in transmission electron microscopy. The ...
The numerical simulation of concrete dams subject to earthquake loading requires realistic material laws which take into account material properties as effected by seismic action. Experiments under simulated seismic action were performed to examine the eff ...
Ultra-High Performance Fibre-Reinforced Concretes (UHPFRC) have high mechanical strengths (fU,c > 150 MPa, fU,t > 6 MPa) and exhibit quasi-strain hardening in tension. Their very low permeability prevents the ingress of detrimental substances. In composite ...
An assessment of the true stress-true strain relationship has been done by means of tensile and small ball punch tests on austenitic and tempered martensitic steel at room temperature. A finite element model was developed and validated to calculate the for ...
The effects of axial tensile and bending strains on the critical current densities of Ag and AgNiMg/Bi-2212 wires produced by the powder-in-tube method have been studied. At T=4.2 K and B=12 T the critical current densities of the investigated single and m ...
A detailed study of the strain-hardening on a Fe-9Cr-0.1C tempered martensitic model alloy has been undertaken in the temperature range of 77-343 K. The true stress-true strain curves were calculated from tensile test data. In the framework of a phenomenol ...
Structural investigations of SrTiO3 thin films deposited by pulsed laser ablation onto MgO and LaAlO3 substrates are presented. The residual strain along the c -axis (the growth direction) was evaluated with conventional X-ray diffraction. Evaluation of th ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...