A novel all-fibre configuration for a flexible polarimetric current sensor
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Five medium size NbTi cable-in-conduit conductors with parametric variations in the cable layout were fabricated of three different strands to investigate their DC performance, AC loss behaviour and transient stability by means of the SULTAN facility. A co ...
A new test facility, dedicated to the measurement of contact resistance distribution in full-size conductor termination, has been designed and manufactured at CRPP Fusion Technology in Villigen, Switzerland. The facility will be used to characterize and qu ...
Two three-phase motors can be controlled independently using a five-leg inverter as the supply, with one leg being common to both machines. Major shortcoming of this topology for general applications is the need to double the DC bus voltage in order to ach ...
Methods have been developed to study the distribution of the transport current among the strand bundles of cable-in-conduit conductors (CICC) by using self-field measurements with Hall probe arrays. The unbalance in the transport current is mainly caused b ...
Usually, each phase of the direct reluctance motor is fed separately by its own inverter producing a squarewave phase current depending on the rotor position. In the present work, a star-connection of the three stator phases is used and the direct reluctan ...
Spin-dependent transport properties of magnetic nanostructures have been investigated by means of magneto-thermogalvanic voltage measurements: the ac voltage response to an ac temperature oscillation is measured for various magnetic nanostructures under dc ...
This paper presents the development of radial eddy-current position sensors for high temperature active magnetic bearing (AMB) applications. Thick-film technology was used to realize silver coils printed on ceramic substrates. Long term measurements showed ...
This set-up is particularly simple and makes possible the use of a flexible cable that may be plugged to the instrument using connectors for easy field applications. Measurements of AC and DC currents are demonstrated. ...
A novel polarimetric fiber optics current sensor configuration using an in-line 22.5 degree Faraday rotator is proposed on this paper. The introduction of the 22.5 degree Faraday rotator allows to obtain a sensor configuration that does not require adjustm ...
Institute of Electronics, Information and Communication Engineers2000
A section of the ITER (International Thermonuclear Experimental Reactor) conductor, left from the winding of the Central Solenoid Model Coil, was tested for stability under pulsed transverse field in the SULTAN facility, at background field up to 11 T and ...