Laser linewidth determination in the sub-Megahertz range using a Brillouin fibre laser
Related publications (83)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This thesis addresses general aspects of the operation of a coupled-cavity vertical surface-emitting laser (CC-VCSEL) which consists of two active cavities optically coupled and independently electrically pumped. The first two chapters of the thesis deal w ...
We report direct absorption spectroscopic detection of ozone at ambient pressure with a pulsed, DFB quantum-cascade laser (QCL) tuned within 1044-1050 cm(-1) by temperature scanning. Wavelength calibration curves were derived from FTIR and CO2 spectra and ...
In this paper, we present a novel Brillouin fiber-ring laser utilizing an unbalanced Mach-Zehnder interferometer (UMZI) as coupling device. The laser is pumped by a distributed-feedback laser diode and shows continuous-wave and single-frequency operation. ...
Sensitive photoacoustic detection of methane (CH4), hydrogen chloride (HCI) and water vapour (H2O) in the near-infrared range using semiconductor DFB lasers is reported. A detection limit of 0.17 ppm of CH4, 0.2 ppm of HCI and 0.024 ppm of H2O (signal-to-n ...
Characteristics of one-cascade (1.06 double right arrow 1.24 mum) and two-cascade (1.06 double right arrow 1.24 double right arrow 1.48 mum) phosphorus-doped fiber Raman lasers are studied. The cavities of both lasers are formed by Bragg gratings written d ...
Infrared spectroscopy using semiconductor lasers is a promising technique for trace gas detection. It allows a continuous and real time monitoring of several species, with a high sensitivity and a good selectivity. Among all the possible methods two are pa ...
Because of the strong electron-phonon coupling of the emitting 3d orbital in transition-metal (TM) ions, 3d systems exhibit luminescence with typically several hundred nm of spectral bandwidth. TM-ion-doped materials are, therefore, of high interest for ap ...
First investigations of photoacoustic (PA) spectroscopy (PAS) of methane using an antimonide semiconductor laser are reported. The laser fabrication is made in two steps. The structure is firstly grown by molecular beam epitaxy, then a metallic distributed ...
This work presents the development of an original concept of a side pumped diode pumped crystal laser for the generation of a high power near diffraction limited beam for material processing applications such as cutting, marking and drilling. An approach b ...
Spectroscopic measurements on ethylene were performed using a quasi-room-temperature quantum cascade (QC) laser operated in pulsed mode in the 10.3 μm range. Using transmission spectroscopy, a broadening of the ethylene absorption spectrum was observed wit ...