Probabilistic modelling of microstructure formation in solidification processes
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Continuous hot-dip galvanization is a process during which steel sheets are coated with a layer of Zn-Al alloy to protect them against corrosion. As the name indicates, this is achieved by dipping the preheated sheet into a bath of molten alloy. The sheet ...
Under certain thermal conditions (G approximate to 1 x 10(4) K/m, v(s) approximate to 1 x 10(-3) m/s), < 1 1 0 > twinned dendrites appear in aluminum alloys and can overgrow regular columnar dendrites, provided that some convection is also present in the m ...
A growth model for the low pressure chemical vapor deposition (LPCVD) of polycrystalline ZnO thin films is proposed. This model is based on experimental observations of the surface morphology and crystallographic orientations of the layers at different thi ...
Aluminum zinc alloys constitute an important class of wrought alloys, the so-called 7000 series, and are also widely used as anti-corrosion coatings of steel sheets. They are also interesting from a more fundamental point of view because zinc, a hexagonal ...
Standard theta-2 theta and pole figure X-ray diffraction techniques were used to study structural properties and preferred orientation of nanostructured TiAIN thin films prepared using cathodic are deposition. Systematic collection of reflections from latt ...
Pure and barium titanate (BT) powders doped with different lanthanum concentration were prepared by the polymeric precursor method (Pechini process) which was carried out as a three-stage process from organometallic complexes. Sintering of pressed powders ...
X-ray diffraction (XRD) techniques are widely used in determining crystallographic orientations. In this paper we describe a two-step method to determine the three-dimensional orientations of ferroelectric single crystals based on an improved rotating orie ...
The solidification of an aluminum-copper alloy has been simulated in 3D using a granular model. Compared to previous similar 2D approaches for where only one phase is continuous, the extension to 3D allows for concurrent continuity of the solid and liquid ...
Minerals, Metals & Materials Soc, 184 Thorn Hill Rd, Warrendale, Pa 15086-7514 Usa2009
The exact mechanism of creep resistance enhancement due to yttrium (Y) doping in a-alumina is still subject to speculation, although it is known that dopants segregate strongly to grain boundaries. The current work applies atomistic simulation techniques t ...
Growth directions and crystallographic orientations of solidification microstructures have been measured in Al-Zn alloy near the eutectic composition. Al dendrites in Al-92 wt.% Zn alloy were found to grow along the I 10) directions while Zn dendrites in A ...
