Liquid lead-bismuth embrittlement effects on unirradiated and irradiated ferritic/martensitic steels for nuclear applications
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Elastoplastic toughness testing of pure aluminium replicated foam is conducted following a J-procedure adapted from the ASTM E1820-08a standard using disc-shaped compact tension specimens. Tests cover a wide range of foam relative density V-m (10-24%). Res ...
Oxide dispersion strengthened (ODS) steels are candidate materials for advanced electric energy and heat generation plants (nuclear, fossil). Understanding the degradation of mechanical properties of these alloys as a result of service exposure is necessar ...
In this work we have studied brittle fracture in high-chromium reduced activation tempered martensitic steels foreseen as structural materials for thermonuclear fusion reactors. Developing the adequate materials that can withstand the severe irradiation co ...
Recrystallization characteristics of severe cold rolled Cu-0.23 vol%Al2O3 alloy were investigated through the examination of properties and microstructure. A special change of mechanical and physical properties was observed during the annealing process, wh ...
The microstructure and mechanical properties of hot rolled Fe-40 at-%Al based intermetallic alloys, with 0.1 at-%Zr and different additions of B (varying from 0.01 to 0.1 at-%), are characterised. The additions of Zr and B improve tensile properties at roo ...
Cu-Ni-Sn alloys with Pb additions exhibit high mechanical strength at room temperature coupled with good machinability but experience a significant ductility loss above the melting point of lead. We explore here the influence of minor additions of Al, Mn, ...
This thesis is an exploration of deformation and fracture properties of a novel two-phase α2 + γ Ti46Al8Ta (at.%) alloy featuring a "convoluted" microstructure, produced by partners within a European Union project named IMPRESS. Properties of this alloy ar ...
Hydrogen embrittlement is a pervasive mode of degradation in many metallic systems that can occur via several mechanisms. Here, the competition between dislocation emission and cleavage at a crack tip is evaluated in the presence of H. At this level, embri ...
The Mode I and II fracture behaviors of adhesively-bonded joints composed of pultruded glass fiber-reinforced polymer (GFRP) laminates were experimentally investigated using Double-Cantilever-Beam (DCB) and End-Loaded-Split (ELS) specimens. The large speci ...
Fracture tests have been performed on 333 flexure hinges of various shapes machined in monocrystalline silicon by Deep Reactive Ion Etching. The results show the significant effects of stress concentration, crystalline orientation and surface treatments on ...
