High tunnel magnetoresistance in spin-polarized scanning tunneling microscopy of Co nanoparticles on Pt(111)

Harald Brune, Stefano Rusponi, Nicolas Weiss
2005
Journal paper

Abstract

We employ variable-temperature spin-polarized scanning tunneling microscopy in constant current mode to read the magnetic state of monodomain cobalt nanoparticles on Pt(111). In order to avoid stray fields we use in situ prepared antiferromagnetically (Cr) coated W tips. The contrast in apparent height between nanoparticles with opposite magnetization is typically Delta z=0.20 +/- 0.05 A, but can reach up to 1.1 A, indicating 80% spin-polarization of the nanoparticles and 850% magnetoresistance of the tip-sample tunnel junction with tip and sample at 300 K and 160 K, respectively. There is no zero-bias anomaly. These results suggest state-selective tunneling which is expected to lead to very high magnetoresistance values. (C) 2005 American Institute of Physics.

Official source

https://infoscience.epfl.ch/record/135826?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts

Related publications

Related publications (16)

This thesis reports results on magnetic properties of supported cobalt nanostructures. The nanostructures were grown on single crystal metal surface by Molecular Beam Epitaxy in an Ultra High Vacuum chamber. Our experimental setup is based on two in situ measurement techniques. The first is the Scanning Tunneling Microscope (STM) allowing to investigate the nanostructure morphology. The second, called Surface Magneto-Optical Kerr Effect (SMOKE), probes the magnetism of the nanostructures. By combining the data obtained with both techniques we were able to investigate the magnetism of 2D nanoparticles down to the atomic level. The first aim of the thesis consisted in disclosing the role played by the differently coordinated atoms in determining the Magnetic Energy Anisotropy in 2D nanostructures. To this purpose, we performed experiments on the Co/Pt(111) system, chosen as a model system since the Pt surface is well known to increase the out-of-plane uniaxial anisotropy as well as the magnetic moment of the Co islands. A preliminary work has been devoted to the growth of the Co islands as a function of the deposition and annealing temperatures. As a result, we learned to grow three different island's shapes : ramified, compact and double-layer islands. We then concentrated on the magnetism of these islands. Due to the nonlinear relationship between perimeter length and surface area, we were able to distinguish the different contributions to the anisotropy energy of surface and perimeter atoms. We found that the magnetic anisotropy in 2D Co nanostructures is predominantly due to the low-coordinated edge atoms, for which the anisotropy energy can be as large as 20 times the bulk value. This finding opens new possibilities to separately tune the anisotropy and moment of nanostructures. To exemplify this, and to illustrate once more the role of perimeter atoms, we produced Co island with a non-magnetic Pt core. As expected, these bimetallic islands have identical anisotropy and lower magnetic moment to their equally shaped pure Co counterpart. The second aim we focused on was the investigation of the magnetic properties of ultra-high density arrays of nanostructures created by self-assembly. We chose Co/Au(788) as a model system since the nanoscopic Co dots were found to have a very narrow size distribution and to be placed onto a lattice which is phase coherent on a macroscopic length scale. Moreover, the array has a density of 26 Tdot/in2 which allows the investigation of inter-particle interaction in ultra high density arrays. We showed that the narrow size distribution of the dots corresponds to an unprecedented narrow Magnetic Anisotropy Energy distribution with 35% width at half of the maximum. Moreover, we demonstrated the weak magnetic coupling between the Co dots despite their high density. In parallel to these fundamental researches, we developed a new experimental setup that will replace the current one. We designed a UHV chamber equipped with a homemade variable temperature STM combined with a SMOKE experiment. A quadrupole, focused on the sample, generates a 0.35 T magnetic field. This field is one order of magnitude larger than the present one and can be uniformly rotated in the plane of the quadrupole. Furthermore, the design of the new chamber allows STM imaging in this magnetic field. In this report, we present the adopted solutions as well as the first tests of the components (STM, SMOKE, cryostat).

EPFL2004

Magnetism of individual adatoms and of epitaxial monolayers

Anne Lehnert

This thesis reports on the magnetism of low coordinated Fe and Co atoms in different chemical and electronic environments. The objective of this research was to contribute to the fundamental understanding of the magnetic properties, such as magneto-crystalline anisotropy energy (MAE), orbital and spin magnetic moment, of surface supported transition metal (TM) atoms and one atomic layer thick epitaxial TM films. A detailed knowledge on the interplay of electronic hybridization and magnetic properties is mandatory to elaborate new materials with high perpendicular magnetic anisotropy and acceptable writing field for future use in magnetic recording devices. The magnetic properties of the different experimental systems were investigated by x-ray absorption spectroscopy, x-ray magnetic circular dichroism, and magneto-optical Kerr effect (MOKE) and they were correlated to the morphology obtained by scanning tunneling microscopy (STM). The first part focuses on the effect of electronic hybridization between isolated 3d TM atoms and different kinds of substrates. First, we considered 4d and 5d TM substrates known for their high magnetic polarizability due to the close onset of ferromagnetism. Deposition of single Fe and Co atoms on Rh(111), Pd(111), and Pt(111) produces an increasing MAE going from Rh to Pd and finally to Pt that we directly correlate to the increasing spin-orbit constant of the substrate interlinking the induced magnetic moment and the MAE. Further we investigated single Fe and Co atoms on two different insulating layers, namely Al2O3/Ni3Al(111) and Cu2N/Cu(001), providing an efficient decoupling of the TM 3d states from the conduction electrons of the substrates. In case of the alumina film the absorption spectra of Fe and Co show a pronounced multiplet structure. On Cu2N the multiplet features of the adatoms are less defined due to the lower thickness of the screening layer. On both insulating layers we find a common out-of-plane easy axis, highly unquenched orbital moments, and giant MAE values of several meV/atom which are due to the formation of strong anisotropic bonds with the O and N atoms, respectively. The second part is dedicated to single atom thick layers of Fe and Co deposited on Pt(111) and Rh(111). We find the MAE to be strongly enhanced compared with bulk and we establish a direct proportionality between the induced magnetic moment of the topmost substrate layer and the MAE. The study of bimetallic Fe1-xCox alloys on platinum reveal a material with high MAE (0.5 meV at the equiatomic composition), large saturation magnetization (3μB to 2μB going from Fe to Co), and perpendicular magnetization easy axis. These characteristics hint at new possibilities for the further miniaturization of the grain size in recording devices. In the last part the theoretical description of the MOKE for ultra-thin films is extended to the transverse geometry and improved analytic formulae for the polar and longitudinal geometry are presented. This finding was used to optimize the Kerr signal for a new MOKE setup which is fully integrated in an ultrahigh vacuum chamber combining in situ MOKE and STM. The setup performance was demonstrated for a continuous film of 0.9 monolayers (ML) Co/Rh(111) with in-plane easy axis and for a superlattice of nanometric double layer Co islands on Au(11,12,12) with out-of-plane easy axis. The detection limit is 0.5 ML for transverse and 0.1 ML for polar Kerr geometry corresponding for island superlattices with the density of Co/Au(11,12,12) to islands composed of about 50 atoms. Moreover, the setup holds two independent ways to measure the MAE which is either by thermally induced magnetization reversal or by applying a torque onto the magnetization by turning the magnetic field. Both ways yield similar results for 1.1 ML Co/Au(11,12,12).

EPFL2009

Electronic and magnetic interactions in single molecular and atomic contacts

Verena Katharina Schendel

This thesis encompasses an investigation of organic molecules on metallic substrates as well as a study of electronic and magnetic effects in atomic-sized palladium contacts. For this, a scanning tunneling microscope, operating at 6 K and ultra-high vacuum is used. The clean environment allows characterization of single molecules and atoms under well-defined conditions. Moreover, by examining at low-temperatures it is possible to study electronic and magnetic effects spectroscopically, which would otherwise be thermally obscured. The first part of this thesis focuses on studying organic molecules absorbed on metallic substrates. The molecules under investigation are thiophene derivatives of the archetypical organic semiconductor pentacene. The thiophene derivatives, tetracenothiophene (TCT) and anthradithiophene (ADT), contain either one or two thiophene groups at the terminal benzene rings. The dependence of the deposition temperature as well as the impact of different metallic substrates on their adsorption behavior is studied. When depositing the molecules on a Au substrate at room temperature, the molecules stay fully intact. In contrast, when deposited onto a Cu substrate, a breaking of the thiophene entity is observed. The breaking can be prevented by cooling the substrate to 200 K during deposition. Conductance measurements on the TCT molecules with an intact and broken thiophene entity reveal differences in their transport characteristics. The intact ones exhibit lower conductances than the broken ones. This can essentially be attributed to the fact that the latter ones bind covalently to the substrate, which facilitates transport. ADT deposited on Cu(111) can be reversibly and repeatedly interconverted between two distinct adsorption congurations associated with different conductances, and thus has been investigated as a molecular switch. The switching mechanism is related to a change between two different bonding configurations of the molecule to the substrate. The non-switched state ("off") can be ascribed to a strongly bound state and the switched state ("on") to a weaker bound configuration. The switching process is not only restricted to the location beneath the tip but also can be initiated within an extended area of about 100 nm in radius. This long-ranged addressing is enabled by means of surface state carriers of the Cu(111) surface. The non-local switching process is fully reversible, isomer selective and efficient over radial distances of about 100 nm. The second part of this work examines atomic-sized palladium (Pd) contacts. Pd exhibits outstanding properties owing to its high density of states (DOS) at the Fermi level. This renders Pd a "nearly ferromagnetic" material. Upon size confinement the DOS can be pushed to higher values and Pd can develop a net magnetization. Transport measurements were carried out for two distinct contact geometries; a tip-adatom and and a tip-surface contact geometry. Whereas for the tip-adatom contacts no magnetic state can be detected, measurements conducted for the tip-surface geometry might indicate the presence of a magnetic moment. The differences are attributed to the adsorption configuration of the single bridging atom in the junction. Spectra taken in point-contact with an adatom reveal a distinct inverted V-shaped feature. Presently we attribute this feature to paramagnons.

EPFL2015