Publication

Electrochemical evidence of catalysis of oxygen reduction at the polarized liquid–liquid interface by tetraphenylporphyrin monoacid and diacid

Hubert Girault, Bin Su
2009
Journal paper
Abstract

Cyclic voltammetry is used to study the role of 5,10,15,20-tetraphenyl-21H,23H-porphine (H2TPP) in the reduction of molecular oxygen by decamethylferrocene (DMFc) at the polarized water|1,2-dichloroethane (DCE) interface. It is shown that this rather slow reaction proceeds remarkably faster in the presence of tetraphenylporphyrin monoacid (H3TPP+) and diacid (H4TPP2+), which are formed in DCE by the successive transfer of two protons from the acidified aqueous phase. A mechanism is proposed, which includes the formation of adduct between H3TPP+ or H4TPP2+ and O2 that is followed by electron transfer from DMFc to the adduct leading to the observed production of DMFc+ and to the regeneration of H2TPP or H3TPP+, respectively.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (24)
Cyclic voltammetry
In electrochemistry, cyclic voltammetry (CV) is a type of potentiodynamic measurement. In a cyclic voltammetry experiment, the working electrode potential is ramped linearly versus time. Unlike in linear sweep voltammetry, after the set potential is reached in a CV experiment, the working electrode's potential is ramped in the opposite direction to return to the initial potential. These cycles of ramps in potential may be repeated as many times as needed.
Voltammetry
Voltammetry is a category of electroanalytical methods used in analytical chemistry and various industrial processes. In voltammetry, information about an analyte is obtained by measuring the current as the potential is varied. The analytical data for a voltammetric experiment comes in the form of a voltammogram which plots the current produced by the analyte versus the potential of the working electrode. Voltammetry is the study of current as a function of applied potential.
Linear sweep voltammetry
In analytical chemistry, linear sweep voltammetry is a method of voltammetry where the current at a working electrode is measured while the potential between the working electrode and a reference electrode is swept linearly in time. Oxidation or reduction of species is registered as a peak or trough in the current signal at the potential at which the species begins to be oxidized or reduced. The experimental setup for linear sweep voltammetry utilizes a potentiostat and a three-electrode setup to deliver a potential to a solution and monitor its change in current.
Show more
Related publications (55)

Multielectron Redox Chemistry of Uranium by Accessing the plus II Oxidation State and Enabling Reduction to a U(I) Synthon

Rosario Scopelliti, Marinella Mazzanti, Ivica Zivkovic, Anne-Sophie Chauvin

Thesynthesis of molecular uranium complexes in oxidation stateslower than +3 remains a challenge despite the interest for their multielectrontransfer reactivity and electronic structures. Herein, we report theone- and two-electron reduction of a U(III) com ...
AMER CHEMICAL SOC2023

Visible-light driven water oxidation and oxygen production at soft interfaces

Hubert Girault, Astrid Johana Olaya Avendano, Jorge Gustavo Uranga, Julieta Soledad Riva, Sara Natalia Moya Betancourt

The visible light driven water oxidation reaction (WOR) by the organic electron acceptor 2,3,5,6-tetrafluoro-7,7,8,8-tetracyano-quinodimethane (TCNQF(4)) was studied at the water|butyronitrile interface. The WOR was performed at neutral pH, and without any ...
ROYAL SOC CHEMISTRY2022

Mono-, Di- and Tetra-iron Complexes with Selenium or Sulphur Functionalized Vinyliminium Ligands: Synthesis, Structural Characterization and Antiproliferative Activity

Paul Joseph Dyson, Lucinda Kate Batchelor, Silvia Schoch

A series of diiron/tetrairon compounds containing a S- or a Se-function (2a-d, 4a-d, 5a-b, 6), and the monoiron [FeCp(CO){SeC1(NMe2)(CHC3)-H-2(Me)}] (3) were prepared from the diiron mu-vinyliminium precursors [Fe2Cp2(CO)( mu-CO){mu-eta(1): eta(3)-C-3(R')( ...
2020
Show more

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.