Publication

PYROMEMS IGNITER BASED ON A TEMPERATURE GRADIENT: CONCEPT, FABRICATION AND CHARACTERIZATION

Related publications (21)

Carbon Dioxide Capture From Internal Combustion Engine Exhaust Using Temperature Swing Adsorption

In order to reduce the CO2 emissions in the transportation sector, one can electrify the vehicle, switch to biofuel, or capture and store CO2 on board. In this study, integration of an on board CO2 capture and storage unit with an internal combustion engin ...

FRONTIERS MEDIA SA2019

Multi-objective optimization of turbo-ORC systems for waste heat recovery on passenger car engines

Jürg Alexander Schiffmann, Eliott Philippe Guenat, Violette Mounier, Kévin Rosset

Waste heat recovery from passenger car internal combustion engines by means of an organic Rankine cycle (ORC) system is promising for reducing CO2 emissions. In this study, different cycle configurations capable of converting waste heat from both coolant a ...

2018

Energy integration on a gasoline engine for a vehicular application

François Maréchal, Zlatina Kirilova Dimitrova

The internal combustion engines are the most applied energy converters in the passenger cars. In order to increase their efficiency, energy integration techniques are used to recover the waste heat. An adapted methodology is required to design the ORC as a ...

2017

Potential of Small-Scale Turbomachinery for Waste Heat Recovery on Automotive Internal Combustion Engines

Jürg Alexander Schiffmann, Eliott Philippe Guenat, Violette Mounier, Kévin Rosset

This paper investigates the waste heat recovery potential of internal combustion engines, using organic Rankine cycles running on small-scale radial turbomachinery. ORC are promising candidates for low-grade thermal sources and the use of dynamic expanders ...

2015

Generating large force/displacement actuators at the millimeter and sub-millimeter scales remains an important challenge for microsystems engineers. One promising solution is to integrate high-energy density solid propellant fuels in microsystems (pyroMEMS ...

EPFL2012

Ignition and Combustion Behavior in Solid Propellant Microsystems Using Joule-Effect Igniters

Nico de Rooij, Danick Briand, Volker Gass, David de Koninck

A study of solid propellant ignition and combustion of potassium dinitrobenzofuroxanate in Joule-heating pyrotechnical microelectromechanical systems igniters is carried out using a high-speed framing camera. The effect of igniter geometry, propellant form ...

2011

, , , , ,

Surface Dielelectric Barrier Discharges (DBD) are becoming very attractive in the field of flow control technologies for their promising effects on stabilising separating flows, at least at low speeds under the so-called ionic wind effect. Numerous experim ...

2010

A SHADOW MASK-EVAPORATED TOPSIDE PYROMEMS IGNITER

Nico de Rooij, Danick Briand, David de Koninck

A shadow mask-evaporated pyroMEMS igniter is presented. The metallization was successfully carried out without ignition or any visible degradation of the propellant charge during evaporation. Directly depositing the Joule-heating igniter onto the propellan ...

2010

, ,

A novel ignition concept based on autoignition in an unscavanged prechamber is currently being developed at the Laboratory for Industrial Energy Systems (LENI). On a single cylinder test engine a series of experimental runs (CR=8.5-14, =1-1.6, RPM=1150/150 ...

2009

Development of a natural gas reaction mechanism for engine simulations based on rapid compression machine experiments using a multi-objective optimisation strategy

Daniel Favrat, Stefan Heyne

The ignition delay times of CH4/C2H6/C3H8 mixtures representative of an average natural gas composition have been measured in a rapid compression machine (RCM) at the University of Lille. The pressure at the end of compression (EOC) varied from 13 to 21 ba ...

2008

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.