Assessment of irradiation embrittlement of the Eurofer97 steel after 590 MeV proton irradiation
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The creep properties of a cast gamma-alpha-2 lamellar titanium aluminide of type Ti-46Al-2W-0.5Si (at. %) containing beta-particles was investigated using both helium-implanted and non-implanted material. Creep tests were performed in vacuum under constant ...
The effect of temperature on the crack onset strain (COS) of brittle coatings on polymer substrates was investigated through a series of temperature-controlled tensile tests carried out in situ under an optical microscope. It was observed that the failure ...
Effects of non-uniform strains on tensile fracture of fiber-reinforced ceramic–matrix composites have not been satisfactorily explained by existing mechanics-based models. In this paper, we use an exact model of fiber fragmentation under global load sharin ...
The clustering of helium in bcc (body centered cubic) iron and the growth of a helium bubble are simulated at the atomistic level for the helium-rich vacancy-poor condition. It is shown that a 1/2 < 111 > dislocation loop is formed as a sequential collecti ...
The Mode I and II fracture behaviors of adhesively-bonded joints composed of pultruded glass fiber-reinforced polymer (GFRP) laminates were experimentally investigated using Double-Cantilever-Beam (DCB) and End-Loaded-Split (ELS) specimens. The large speci ...
It is shown that the Pb(root 3x root 3)R30/Si(111) ordered layer is an excellent mirror for neutral He atoms. It focuses more than 15% of the incoming He atoms into the specular peak, and is stable up to 450 K. Moreover, the reflectivity remains almost unc ...
In this work we have studied brittle fracture in high-chromium reduced activation tempered martensitic steels foreseen as structural materials for thermonuclear fusion reactors. Developing the adequate materials that can withstand the severe irradiation co ...
The tensile behavior of adhesively-bonded double-lap joints composed of pultruded glass fiber-reinforced adherends and an epoxy adhesive was investigated under temperatures ranging between -35°C and 60°C. The load-elongation response was influenced primari ...
In liquid metal spallation targets such as the MEGAPIE (the megawatt pilot experiment) target and the future ADS (accelerator driven system) spallation targets, which utilize liquid lead-bismuth eutectic (LBE) as the target material, liquid metal embrittle ...
Thermonuclear fusion of light atoms is considered since decades as an unlimited, safe and reliable source of energy that could eventually replace classical sources based on fossile fuel or nuclear fuel. Fusion reactor technology and materials studies are i ...
