Analyse et mise en oeuvre d'un moteur électromagnétique microfabriqué
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Designing transducers or motors, requires the analysis of a lot of parameters such as length, temperature, efficiency, weight, etc. The solution to obtain the optimum results for given specifications is to analyze globally all the free parameters in one go ...
Institute of Mechatronics and Information Systems2002
Developing a research autonomous plane for flying in a laboratory space is a challenge that forces one to understand the specific aerodynamic, power and construction constraints. In order to obtain a very slow flight while maintaining a high maneuverabilit ...
In this paper, a method for sensorless position estimation of linear transducers at standstill is suggested. The method makes use of current pulses, which is a common sensorless starting technique for 3-phase synchronous motors. Most transducers possess ho ...
In some applications, it is interesting to know the position of a BLDC Motor at standstill. This paper propose one solution using the saturation property of the motor. Principle, simulation and measures are presented. The results of industrial applications ...
NOVELTY - After disconnection from normal control (3) a pulse generator (4) sends positive and negative pulses to a motor winding R. The response currents are measured (5) from voltages (Vpr,Vnr) which appear after a fixed time on a neutral resistor (2) an ...
The paper deals with the determination of synchronous machine parameters using a 2D Finite Element Method – FEM (Flux2D- Cedrat). Simulations of no-load sudden three phase short- circuits are performed in rotation, the saturation effects and the eddy curre ...
Poling of lead zirconate titanate pyroelectric thin films has been studied. Poling temperature and electrical field were optimized to achieve high figures of merit. We have found a direct correlation between the onset of degradation current and the final p ...
We will present a method allowing to evaluate the mechanical performances (torque, speed, mechanical power, dissipated losses in the surface of contact between stator and rotor) of the travelling wave ultrasonic motors. The visualization of the motor chara ...
Usually, each phase of the direct reluctance motor is fed separately by its own inverter producing a squarewave phase current depending on the rotor position. In the present work, a star-connection of the three stator phases is used and the direct reluctan ...
When we achiev a good performance of the field-oriented vector control system, it is necessary to detect the speed and flux of the motor. Usually it is hard to implemment these sensors. Then the sensor-less contro-system techniques using the observer inste ...
