Interpretation of experimental results from moderate-power in-pile testing of a Pu-Er-Zr-oxide inert matrix fuel
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Until about the year 2030, current-day nuclear power plants (NPPs) will be replaced by so-called Gen-III or Gen-III+ units, which are mainly based on light water reactor technology. The principal new features are increased safety and improved economical ef ...
The advanced fast reactors of the fourth generation should be capable to breed their own fuel from poorly fissile 238U and to recycle the actinides from their own spent fuel. However, this recycling or actually the closure of fuel cycle has negative impact ...
The reference fuel design currently being considered within the Generation-IV Gas-cooled Fast Reactor (GFR) project is a ceramic plate matrix with a honeycomb inner structure containing small fuel cylinders. The fuel is mixed plutonium-uranium carbide, whi ...
Current fuel management strategies for light water reactors (LWRs), in countries with high back-end costs, progressively extend the discharge burnup at the expense of increasing the 235U enrichment of the fresh UO2 fuel loaded. In this perspective, standar ...
The morphology of single PWR UO2 fuel rods has been investigated by employing computerised gamma-ray transmission tomography. Four highly burnt fuel rods of different burnups (from 52 GWd/t to 126GWd/t) and a fresh rod have been investigated. This paper de ...
Fuel rods with burnup values beyond 50GWd/t are characterised by relatively large amounts of fission products and a high abundance of major and minor actinides. Of particular interest is the change in the reactivity of the fuel as a function of burnup and ...
The safe and economic operation of nuclear power plants (NPPs) requires that the behaviour and performance of the fuel can be calculated reliably over its expected lifetime. This requires highly developed codes that treat the nuclear fuel in a general mann ...
The growth of the porosity in high-burnup fuel is of particular interest when considering the effect of fission gas retention within the high-burnup structure (HBS). A mechanistic model of porosity growth under annealing conditions for light water reactor ...
A measurement station has been built for the non-destructive investigation of burnt fuel rod segments through high-resolution gamma spectrometry. Four UO2 pressurised water reactor fuel rod segments with different burnup levels between 50 and 100GWd/t and ...
Several new fuel designs are currently being considered within the generation-IV gas-cooled fast reactor (GFR) project. One of them, which is the GFR reference design, is a ceramic plate matrix with a honeycomb inner structure containing small fuel cylinde ...
