Reactivity and neutron emission measurements of highly burnt PWR fuel rod samples
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In order to improve the purification capacity of an aerobic granular sludge, two aeration strategies were designed and tested. The goal was to optimize the nitrogen removal performances via various oxygen patterns in the aeration phase of the reactor cycle ...
Computerised gamma-ray emission tomography has been applied to single PWR UO2 fuel rods, with pellet averaged burnups of 52, 71, 91 and 126 GWd/t respectively, for the determination of 134Cs, 137Cs and 154Eu internal radial distributions. State-of-the-art ...
Radial distributions of the total fission rate and the238U- capture-to-total-fission (C 8/F tot) ratio were measured in SVEA-96+ and SVEA-96 Optimal assemblies during the LWR-PROTEUS program. Fission rates predicted using MCNPX with JEFF-3.1 cross sections ...
This letter extends the work performed at Argonne National Laboratory on the QUADRISO fuel particles concept for High Temperature Reactors. Different configurations of the QUADRISO fuel particles concept are proposed and examined. The concept of QUADRISO f ...
The manufacture of chemicals in microstructured reactors (MSR) has become recently a new branch of chemical reaction engineering focusing on process intensification and safety. MSR have an equivalent hydraulic diameter up to a few hundreds of micrometers a ...
The advanced fast reactors of the fourth generation should be capable to breed their own fuel from poorly fissile 238U and to recycle the actinides from their own spent fuel. However, this recycling or actually the closure of fuel cycle has negative impact ...
This paper presents the development and application of a methodology to estimate, using conventional deterministic lattice/core analysis methods, the fast neutron fluence at the tips of control rods inserted during operation in PWR reactors. The developed ...
The reference fuel design currently being considered within the Generation-IV Gas-cooled Fast Reactor (GFR) project is a ceramic plate matrix with a honeycomb inner structure containing small fuel cylinders. The fuel is mixed plutonium-uranium carbide, whi ...
Two zirconium alloys (Zr-2.5%Nb) - one oxidized in a pressurized water reactor, the other oxidized in autoclave and used as reference - are analyzed by combining synchrotron-based scanning transmission and fluorescence X-ray microscopy and micro-X-ray abso ...
Because of the strong asymmetric overcooling effects occurring during a PWR main steam line break (MSLB) event, an accurate analysis of this transient requires the use of 3-D kinetics methods. An assessment has been made of the relative performance of the ...