Reactivity and neutron emission measurements of highly burnt PWR fuel rod samples
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
As part of PSI's validatory efforts for neutronics calculations pertaining to inert matrix fuel (IMF) deployment in light water reactors, first-of-their-kind integral measurements have been carried out at the PROTEUS facility employing a specially fabricat ...
Synchrotron radiation-induced total reflection x-ray fluorescence (TXRF) analysis was used for the trace element analysis of steels exploited in the construction of core components of existing fission plants and future fusion power plants. Detection of tra ...
An effective way to reduce the large quantities of Pu currently accumulated worldwide would be to use uranium-free fuel in light water reactors (LWRs) so that no new Pu is produced. Such a possibility could be provided by an LWR fuel consisting of Pu in a ...
Catalytic hydrogenation of NO2- in water to N2 over Pd-supported on different woven fibrous materials was studied. Low porosity C fiber, low porosity D-type glass fiber, and composite (glass covered by g-Al2O3) fiber were used. Pd dispersion was compared f ...
A detailed three-dimensional, continuous-energy MCNP4B model of the LWR-PROTEUS critical facility has been developed for the analysis of whole-reactor characteristics using ENDF/B-V, ENDF/B-VI and JEF-2.2 cross-section sets. The model has been applied to t ...
A novel membrane reactor with two zones containing structured filamentous catalytic beds was proposed for propane nonoxidative dehydrogenation. Catalytic filaments with a similar to7 similar to mum diameter consist of silica cove-red by porous alumina with ...
Pore size distribution, porosities and consequently derived densities are key parameters for the qualification of inert matrix fuel (IMF). Porous features must be determined accurately for assessing the in-pile behaviour of the fuel. The analytical methodo ...
The retention behaviour of fission products in the material is therefore of special importance. 1 MeV iodine and cesium ions were implanted into yttria-stabilized zirconia (YSZ) and their depth profile was measured by Rutherford Backscattering after subseq ...
HELIOS, CASMO-4, and MCNP4B calculations of reaction rate distributions in a modern, fresh 10 10 boiling water reactor fuel element have been validated using the experimental results of the LWR-PROTEUS Phase I project corresponding to full-density water mo ...
A new calculational scheme has been developed for the accurate assessment of gamma heating in fast reactors, its special feature being the determination of the gamma source distribution that is formulated in a near-to-exact manner. The improved methodology ...
