Experimental validation of reaction rate distributions for a SVEA-96+ BWR assembly with hafnium control blades
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
High resolution gamma-ray spectroscopy measurements were performed on 61 rods of an SCWR-like fuel lattice, after irradiation in the central test zone of the PROTEUS zero-power research reactor at the Paul Scherrer Institute in Switzerland. The derived rea ...
A boiling water reactor SVEA-96+ fresh fuel lattice has been used as the basis for a benchmark study of the void reactivity coefficient at assembly level in the full voidage range. Results have been obtained using the deterministic codes CASMO-4, HELIOS, P ...
Gas cooling in nuclear power plants (NPPs) has a long history, the corresponding reactor types developed in France, the UK and the US having been thermal neutron-spectrum systems using graphite as the moderator. The majority of NPPs worldwide, however, are ...
This paper presents the development and application of a methodology to estimate, using conventional deterministic lattice/core analysis methods, the fast neutron fluence at the tips of control rods inserted during operation in PWR reactors. The developed ...
Total fission rate measurements have been performed on full-size BWR fuel assemblies of type SVEA-96+ in the zero power reactor PROTEUS at the Paul Scherrer Institute. This paper presents comparisons of reconstructed 2D pin fission rates from nodal diffusi ...
Radial distributions of the total fission rate and the238U- capture-to-total-fission (C 8/F tot) ratio were measured in SVEA-96+ and SVEA-96 Optimal assemblies during the LWR-PROTEUS program. Fission rates predicted using MCNPX with JEFF-3.1 cross sections ...
Two zirconium alloys (Zr-2.5%Nb) - one oxidized in a pressurized water reactor, the other oxidized in autoclave and used as reference - are analyzed by combining synchrotron-based scanning transmission and fluorescence X-ray microscopy and micro-X-ray abso ...
The growth of the porosity in high-burnup fuel is of particular interest when considering the effect of fission gas retention within the high-burnup structure (HBS). A mechanistic model of porosity growth under annealing conditions for light water reactor ...
Studies in support of the assessment of aging structural materials in pressurized water reactors are being performed at the Paul Scherrer Institut. To that aim, a state-of-the-art methodology based on applying a CASMO-4/SIMULATE-3/MCNPX calculation scheme ...
The recent experimental programme conducted in the PROTEUS research reactor at the Paul Scherrer Institute (PSI) has concerned detailed investigations of advanced light water reactor (LWR) fuels. More than fifteen different configurations of the multi-zone ...
