Validation of Monte Carlo predictions of LWR-PROTEUS safety parameters using an improved whole-reactor model
Related publications (45)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This paper reports the methodology used for the neutronic modelling of the CROCUS reactor and discusses the challenges encountered during the process. Full-core steady-state neutronics solutions were computed with the PARCS code. The Serpent Monte Carlo co ...
Total fission rate measurements have been performed on full-size boiling water reactor fuel assemblies of type SVEA-96 Optima2 in the framework of phase III of the light water reactor (LWR)PROTEUS experimental program at Paul Scherrer Institute. This paper ...
The findings of the EU 'Materials Assessment Group' (MAG), within the 2012 EU Fusion Roadmap exercise, are discussed. MAG analysed the technological readiness of structural, plasma facing and high heat flux materials for a DEMO concept to be constructed in ...
The Supercritical-Water-Cooled Reactor (SCWR) is the Generation IV reactor concept most closely related to current light water reactors (LWRs). The SCWR builds on the vast experience with today's LWRs and supercritical coal-fired power plants. Water at sup ...
The present doctoral research aims at the appraisal of nodal core simulators used for the calculation of commercial boiling water reactor (BWR) cores, against measurements carried out at the Paul Scherrer Institute under the LWR-PROTEUS experimental progra ...
In order to meet the steadily increasing worldwide energy demand, nuclear power is expected to continue playing a key role in electricity production. Currently, the large majority of nuclear power plants are operated with thermal-neutron spectra and need r ...
In recent years, higher discharge burn-ups and initial fuel enrichments have led to more and more heterogeneous core configurations in light water reactors (LWRs), especially at the beginning of cycle when fresh fuel assemblies are loaded next to highly bu ...
Nuclear power is nowadays in the front rank as regards helping to meet the growing worldwide energy demand while avoiding an excessive increase in greenhouse gas emissions. However, the operating nuclear power plants are mainly thermal-neutron reactors and ...
CEA develops and makes use of miniature fission chambers (MFCs, with radius down to 1.5 mm) for reactor physics conducted in experimental reactors such as EOLE and MINERVE zero power reactors (CEA Cadarache). When measuring fission rate, it is known that t ...
CROCUS is a zero power (100 W) reactor of the Laboratory for Reactor Physics and Systems Behavior (LRS) at the Swiss Federal Institute of Technology, Lausanne (EPFL). It is used for teaching and research purposes. Its modeling has relied so far on diffusio ...