Transient heat loads in current fusion experiments, extrapolation to ITER and consequences for its operation

Related publications (31)

About
Privacy
Disclaimer

Graph Chatbot

Models implemented in the methodological approach to design the initial STEP first wall contour

Davide Galassi, Kevin Henricus Annemarie Verhaegh, Filippo Bagnato, Dario Vaccaro

The official Spherical Tokamak for Energy Production mission aims to demonstrate the ability to generate net electricity from fusion with the STEP Prototype Power plant. One of the key technological and engineering challenges in fusion power plants is mana ...

Elsevier Science Sa2024

Towards practical reinforcement learning for tokamak magnetic control

Federico Alberto Alfredo Felici, Cristian Galperti, Jonas Buchli, Brendan Tracey

Reinforcement learning (RL) has shown promising results for real-time control systems, including the domain of plasma magnetic control. However, there are still significant drawbacks compared to traditional feedback control approaches for magnetic confinem ...

Elsevier Science Sa2024

Interpretative 3D MHD modelling of deuterium SPI into a JET H-mode plasma

Cristian Sommariva, Umar Sheikh, Mengdi Kong, Haomin Sun

The pre-thermal quench (pre-TQ) dynamics of a pure deuterium ( D 2 ) shattered pellet injection (SPI) into a 3 MA / 7 MJ JET H-mode plasma is studied via 3D non-linear MHD modelling with the JOREK code. The interpretative modelling captures the overall evo ...

IOP Publishing Ltd2024

Innovative dud detection based on JET DT experience

Olivier Sauter, Alessandro Pau

DT operations at JET gave a unique and invaluable opportunity to design, develop and test real -time controllers that will be applied in future burning plasma devices, as ITER and SPARC. Among them, the dud detector [L. Piron et al. 2019 Fusion Eng. Design ...

Elsevier Science Sa2024

Gyrokinetic turbulence modeling of a high performance scenario in JT-60SA

Stefano Coda, Stephan Brunner, Aylwin Iantchenko

Local gyrokinetic simulations are used to model turbulent transport for the first time in a representative high-performance plasma discharge projected for the new JT-60SA tokamak. The discharge features a double-null separatrix, 41 MW of combined neutral b ...

IOP Publishing Ltd2024

Parallel flows as a key component to interpret Super-X divertor experiments

Basil Duval, Holger Reimerdes, Christian Gabriel Theiler, Joaquim Loizu Cisquella, Artur Perek, Guang-Yu Sun, Luke Simons, Olivier Claude Martin Février, Garance Hélène Salomé Durr-Legoupil-Nicoud, Davide Galassi

The Super-X Divertor (SXD) is an alternative divertor configuration leveraging total flux expansion at the Outer Strike Point (OSP). While the extended 2-Point Model (2PM) predicts facilitated detachment access and control in the SXD configuration, these a ...

IOP Publishing Ltd2024

Experiments and gyrokinetic simulations of TCV plasmas with negative triangularity in view of DTT operations

Olivier Sauter, Stefano Coda, Justin Richard Ball, Alberto Mariani, Matteo Vallar, Filippo Bagnato

Negative triangularity (NT) scenarios in TCV have been compared to positive triangularity (PT) scenarios using the same plasma shapes foreseen for divertor tokamak test tokamak operations. The experiments provided a NT/PT L-mode pair and a PT H-mode with d ...

Iop Publishing Ltd2024

The magnet feeders for the European DEMO fusion reactor: Conceptual design and recent advances

Rainer Wesche, Roberto Guarino, Frédéric Michel

The magnet feeders are part of the critical systems of a fusion reactor since they represent the interface between the in-cryostat components at 4.5 K and the room-temperature cryogenic plant and power supply. The European DEMO tokamak foresees 16 toroidal ...

2024

Plasmoid drift and first wall heat deposition during ITER H-mode dual-SPIs in JOREK simulations

Mengdi Kong

The heat flux mitigation during the thermal quench (TQ) by the shattered pellet injection (SPI) is one of the major elements of disruption mitigation strategy for ITER. It's efficiency greatly depends on the SPI and the target plasma parameters, and is ult ...

IOP Publishing Ltd2024

Design Progress of Structural Components of the EU DEMO EC Equatorial Launcher

René Chavan, Jean-Philippe Hogge

The EU DEMO Tokamak is foreseen to be equipped with an electron cyclotron (EC) system for plasma heating, magnetohydrodynamic (MHD) control, and thermal instability suppression. Up to six launchers will be installed into equatorial ports with the aim to in ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Page 3 of 4