Multiscale modeling of a thermo-mechanical contact problem
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The rapid development of micro-thermal technologies has conveyed an increasing interest on convective boiling in micro-channels. Although there is general agreement that these systems may be able to dissipate potentially very high heat fluxes per unit volu ...
This article presents experimental results of heat transfer from two different studies [1, 2] for horizontal flow boiling inside smooth copper tubes with different refrigerants. The main goal of this study was to verify the influence of the saturation temp ...
The present study illustrates new experimental two-phase flow pattern observations together with diabatic boiling and adiabatic two-phase frictional pressure drop results for ammonia (R7117) flowing inside a 14-mm internal diameter, smooth horizontal stain ...
A truly meshless method based on the weighted least-squares (WLS) approximation and the method of point collocation is proposed to solve heat conduction problems in heterogeneous media. It is shown that, in the case of strong heterogeneity, accurate and sm ...
The current industrial need for compact high heat density cooling devices has conveyed an increasing interest on convective boiling in micro-channels. Although there is general agreement that these systems may be able to dissipate potentially very high hea ...
Experiments of flow boiling heat transfer were conducted in four horizontal flattened smooth copper tubes of two different heights of 2 and 3 mm. The equivalent diameters of the flattened tubes are 8.6, 7.17, 6.25, and 5.3 mm. The working fluids were R22 a ...
We perform detailed finite element simulations of impact of metallic plates by spherical particles over a range of impact angles and speeds with a view to develop an insight into the fundamental mechanisms underlying solid-particle erosion. The particular ...
A new optical void fraction measurement system has been coupled to the existing LTCM flow boiling test facility to obtain dynamic and time-averaged void fractions, simultaneously with measurements of the local heat transfer coefficients. A series of evapor ...
The flow pattern based flow boiling heat transfer and two-phase pressure drop models for CO2, recently developed by Cheng et al. [L Cheng, G. Ribatski. J. Moreno Quiben, J.R. Thome, New prediction methods for CO2 evaporation inside tubes: Part I - A two-ph ...
An electrically heated foil glued on top of an acrylic wall is employed to measure convective heat transfer on turbine vane platforms. The use of a heater foil requires specific filtering techniques to obtain the searched quantities – heat transfer coeffic ...
