Imaging based optofluidic air flow meter with polymer interferometers defined by soft lithography
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
We introduce for the first time an integrated optofluidic interferometer on a PDMS microfluidic chip. By imaging the local interference patterns inside the chip, both of the fluid pressure and flow rate can be measured. (C) 2009 Optical Society of America ...
Ieee Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2010
Performances of the biosensors are often limited by the depletion zones created around the sensing area which impede the effective analyte transport. To overcome this limitation, we propose and demonstrate a nanoplasmonic-nanofluidic sensor enabling target ...
Since the introduction of the of Micro Total Analysis Systems concept in 1990, important progress in microfluidic analytical systems has been realized. In many cases, microfluidic systems have shown improved analytical performances over classical methods, ...
Magnetic microparticles and their application in bioanalytical microfluidic systems have been steadily gaining interest in recent years. This progress is fueled by the comparatively large and long range magnetic forces that can be obtained independently of ...
Hybrid integration and especially the packaging of microelectromechanical systems (i.e. MEMS) cannot rely on standardised packaging solutions due to the diversity of microsystems. As an example, the packaging requirements of a pressure sensor are different ...
Institut de Microtechnique, Université de Neuchâtel2009
Abstract Microfluidics for most bio-related diagnostic applications typically requires single usage disposable chips to avoid bio-fouling and cross-contamination. Individual piece-wise manufacturing of polymeric microfluidic devices has been widely employe ...
We report on the magnetic actuation of superparamagnetic particles in a microfluidic channel. The formation of a highly confined and dynamic plug of particles extending over the cross section of the microchannel is enabled by superposing a static and a tim ...
We present two novel methods for the preparation of arbitrary microscale patterns of polymers on surfaces with pre-defined topography. While photosensitive polymers are used commonly together with optical lithography, the methods presented can be used for ...
The dynamics of formation of solute peaks in microfluidic systems are investigated by computer simulation. A finite-element numerical procedure is applied to analyze the diffusion- and flow-controlled concentration dispersion in a 40 μm-high rectangular fl ...
This paper describes a simple system for the actuation of a biological fluid through micro-channels with a thermoactivated polymer actuator. This system is of interest for the development of single-use diagnostic test-strips since the actuation of the samp ...
