Monitoring of process induced strains in a single fibre composite using FBG sensor: A methodological study
Related publications (43)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Carbon fiber reinforced polymer composites (CFRPs) are inherently multifunctional materials that, in addition to their primary function as a structural material, allow for the sensing and monitoring of in situ damage nucleation and evolution by the measure ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
The behaviour of brittle matrix fibre reinforced-composites is dependent of the properties of its constituents (fibre, matrix and fibre-matrix interface) and is affected by the mechanical and environmental loads. The fracture of a unidirectional composite ...
Damping is an important parameter for vibration control, noise reduction, fatigue endurance or impact resistance of composite materials. In this study, a micromechanical model was used to predict the damping of a composite material containing shear thicken ...
The purpose of this thesis is to characterize internal strains in polymeric materials due to consolidation. In view of this, optical Fiber Bragg Grating sensors are an excellent non-destructive tool for internal strain characterization and damage detection ...
The influence of the mould material on the build-up of internal stresses during autoclave cure of carbon fibre composites was investigated using embedded optical fibre Bragg gratings. Unidirectional and cross-ply laminates were cured on four flat moulds: a ...
The single-fiber composite (SFC) has been widely used to quantify fiber strength and fiber-matrix interfacial properties of fiber-reinforced composites. Here, a numerical model with an embedded-process-zone model to permit both interface debonding and matr ...
From airplanes to sailboats to bridges, composite materials have become a significant part of our everyday structures. With increasing demand, these materials are pushed to their limits to improve structural efficiency. As a consequence, research and devel ...
Adhesively-bonded joints, including double- and stepped- lap joints (DLJs and SLJs), were experimentally investigated under cyclic tensile loading. The joints were composed of pultruded GFRP laminates and epoxy adhesive. A critical stiffness was found for ...
This study demonstrates the feasibility of using fibre Bragg grating (FBG) sensors to monitor the effects of hygrothermal ageing on the axial strains in a cylindrical epoxy specimen with a centrally located optical glass fibre. A 24 mm long FBG, inscribed ...