Growth directions in directionally solidified Al-Zn and Zn-Al alloys near eutectic composition
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Aluminum zinc alloys constitute an important class of wrought alloys, the so-called 7000 series, and are also widely used as anti-corrosion coatings of steel sheets. They are also interesting from a more fundamental point of view because zinc, a hexagonal ...
The formation of feathery grains during semi-continuous casting of Al-alloys [1, 2] is an interesting problem from both practical and theoretical points of view. These structures are formed by a lamellar sequence of twinned and untwinned regions separated ...
Standard theta-2 theta and pole figure X-ray diffraction techniques were used to study structural properties and preferred orientation of nanostructured TiAIN thin films prepared using cathodic are deposition. Systematic collection of reflections from latt ...
We describe a highly effective method of reducing thermal sensitivity in piezoresistive sensors, in particular silicon cantilevers, by taking advantage of the dependence of the piezoresistive coefficient of silicon on crystallographic orientation. Two simi ...
The transformation of pyroxene to its high-pressure polymorph akimotoite (MgSiO3 ilmenite type structure) is documented in the shock-induced melt veins of the L6 Tenham chondrite. Four textural relationships between pyroxene and akimotoite are observed in ...
A growth model for the low pressure chemical vapor deposition (LPCVD) of polycrystalline ZnO thin films is proposed. This model is based on experimental observations of the surface morphology and crystallographic orientations of the layers at different thi ...
The formation of twinned dendrites (feathery grains) in binary Al-Zn, Al-Mg, Al-Cu and Al-Ni alloys has been studied in specimens directionally solidified under identical thermal conditions, i.e. G approximate to 100 K cm(-1), v approximate to 1 mm s(-1), ...
The microstructure of a Co38Ni33Al29 ferromagnetic shape memory alloy was determined by conventional transmission electron microscopy (TEM), electron diffraction studies together with advanced microscopy techniques and in situ Lorentz microscopy. Rod-like ...
In order to obtain a sensor with force resolution better than 100 pN for biomolecular detection, U-shaped piezoresistive cantilevers made of crystalline silicon have been fabricated. The resistors have been defined by ionic implantation of As+, yielding a ...
Al-Zn-Si alloy coatings are widely used for the corrosion protection of steel sheets. In addition to the favorable corrosion properties, the Al-43wt%Zn-1.6wt%Si coatings present several features which are of metallurgical interest. The first one is their s ...
