Er-doped Al2O3 thin films deposited by high-vacuum chemical vapor deposition (HV-CVD)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Using infra-red (IR) thermography, power loads onto the MKII Gas-Box divertor targets have been investigated in Type-I ELMy H-Mode plasmas at JET in medium current discharges (I-p = 2.6MA and B-T = 2.7 T). Heat fluxes are calculated from the measured diver ...
Hafnium tetrachloride is one of the most commonly used precursors for atomic layer deposition of HfO2. According to the experimental result, chlorine residue is almost unavoidably incorporated during the deposition process. We performed first-principles ca ...
Gold nanoparticles with hydrophobic surface have been deposited on a silicon substrate chemically patterned by reactive ion etching through a stencil mask and chemical vapour deposition of alkyl silanes. After deposition by dipping and adequate rinsing, th ...
Thin films of tantalum oxynitride were prepared by reactive magnetron sputtering using a Ta target and N2 and O2 as reactive gases. The nitrogen flow was kept constant while the oxygen flow was pulsed periodically. The film composition evolves progressivel ...
We present a MEMS process for the fabrication of arbitrary (adaptable to specific aperture geometries) stabilization of silicon nitride membranes to be used as miniature shadow masks or (nano) stencils. Stabilization was realized by the fabrication of sili ...
The main focus of this work is fuel retention in plasma components of the JET water-cooled Mk-I divertors operated with small tiles, first with carbon fibre composite (CFC) and then with castellated beryllium. Until recently these have been the only large- ...
Scanning tunneling microscopy (STM) has been used to investigate the nucleation and stability of iron clusters on the Al2O3/Ni3Al (111) surface as a function of coverage and annealing temperature. We show that atomic beam deposition of iron leads to hexago ...
We have calculated the atomistic mechanism for the HfO2 atomic layer deposition (ALD) using Hf(NEtMe)(4) and H2O precursors using density functional theory. On hydroxylated Si surface, our results show overall Hf(NEtMe)(4) half-reaction is exothermic by 1. ...
Ag cubes of uniform size (70nm) and self-assembled into two dimensional arrays are formed by physical vapor deposition. The formation of the Ag cubes depends critically on the substrate composition. While heat dissipation can control the crystallization of ...
Nano Science and Technology Institute, Cambridge, MA 02139, United States2006
Recently, some research effort has been instigated towards micro and nano patterning of curved surfaces, as system miniaturization by means of patterned planar surfaces has practically reached its limits. In contrast to the more practical approach of exist ...
