Sub-ppm multi gas sensing based on photoacoustic spectroscopy using DFB laser diodes
Related publications (40)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This paper presents continuative results on the design, fabrication and measurements of a vertically moving, electrostatically actuated micromirror, first shown at the IEEE MEMS 2007 [N. Quack, I. Züst, S. Blunier, J. Dual, M. Arnold, F. Felder, M. Rahim, ...
A photoacoustic multi-gas sensor using tuneable laser diodes in the near-infrared region is reported. An optimized resonant configuration based on an acoustic longitudinal mode is described. Automatic tracking of the acoustic resonance frequency using a pi ...
A record 730 nm parametric conversion in silica fiber from the near-infrared to the short-wave infrared band is reported and analyzed. A parametric gain in excess of 30 dB was measured for a signal at 1300 nm (with corresponding idler at 2030 nm). This con ...
A four-wavelength low-power continuous-wave frequency laser reference system has been realised in the 935.4-nm range for water vapour differential absorption lidar (DIAL) applications. The system is built around laboratory extended-cavity and DFB diode las ...
We describe a low-power continuous-wave laser system for water-vapour sensing applications in the 935-nm region. The system is based on extended-cavity diode lasers and distributed-feedback lasers and delivers four single-mode frequency-stabilised optical ...
Sub-ppm hydrogen chloride (HCl) and water vapour (H2O) monitoring using photoacoustic spectroscopy in optical fibre manufacturing is reported. The development and performance of a sensor based on an acoustic resonant configuration is described, and on-site ...
Photoacoustic spectroscopy is a widely recognised technique to measure trace gases at parts-per-million (ppm) or parts-per-billion (ppb) level using semiconductor laser in the near infrared range. This technique is based on the generation of an acoustic wa ...
Highly sensitive photodetectors for the mid-infrared have recently been obtained by placing a photodiode inside a Fabry-Pérot cavity (Arnold et al 2005 Appl. Phys. Lett. 87 141103). These resonant cavity enhanced detectors (RCED) are sensitive at the res ...
Photoacoustic spectroscopy is a well-established gas traces optical detection technique, which consists in the generation of an acoustic wave in the investigated gas compound excited by a modulated laser beam, and in the detection of this sound wave with a ...
A theoretical description of photoacoustic spectroscopy generated by wavelength modulation of a semiconductor laser source is reported for a Lorentzian absorption line. This model describes the first- and second-harmonic photoacoustic signals produced by a ...