Simulation of Semi-Solid Material Mechanical Behavior Using a Combined Discrete/Finite Element Method
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Pure and barium titanate (BT) powders doped with different lanthanum concentration were prepared by the polymeric precursor method (Pechini process) which was carried out as a three-stage process from organometallic complexes. Sintering of pressed powders ...
In finite element simulations dedicated to the modelling of microstructure evolution, the mesh has to be fine enough to: (i) accurately describe the geometry of the constituents; (ii) capture local strain gradients stemming from the heterogeneity in materi ...
Despite many years of intensive research there still remain many unresolved questions in powder and ceramic technology. A majority of these issues are linked to interfacial phenomena of atomic scale origin, which makes their experimental investigation very ...
The interaction of dislocations with grain boundaries (GBs) determines a number of important aspects of the mechanical performance of materials, including strengthening and fatigue resistance. Here, the coupled atomistic/discretedislocation ( CADD) multisc ...
Two important factors affecting hot tearing - semi-solid constitutive behaviour and grain percolation - have been simulated through the use of microstructure models based on granular structures. The semi-solid model geometry is based on a modified Voronoi ...
HPL SA report the modification of the electrochemical performance of lithium manganese phosphate (LiMnPO4) via Mn-site bivalent substitution. Manganese (10%) is substituted with iron, nickel, magnesium, or zinc. These substituents are shown via an X-ray to ...
The solidification of an aluminum-copper alloy has been simulated in 3D using a granular model. Compared to previous similar 2D approaches for where only one phase is continuous, the extension to 3D allows for concurrent continuity of the solid and liquid ...
Minerals, Metals & Materials Soc, 184 Thorn Hill Rd, Warrendale, Pa 15086-7514 Usa2009
Materials consisting of grains or crystallites with sizes below a hundred nanometers have exhibited unique physical and mechanical properties in comparison to their coarse-grained counterparts. As a result, considerable effort has been put into uncovering ...
The exact mechanism of creep resistance enhancement due to yttrium (Y) doping in a-alumina is still subject to speculation, although it is known that dopants segregate strongly to grain boundaries. The current work applies atomistic simulation techniques t ...
Hot cracking is a spontaneous failure of an alloy during solidification. It is a severe problem for casting industry as it reduces the productivity of cast houses and limits the range of alloys compositions that can be industrially produced. Hot tears occu ...
