Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The tolerances of semi-continuously cast products of aluminium alloys are very critical if the scalping of the ingot faces is to be minimised before rolling. In the steady state regime of casting, the dimensions of the section of the solidified ingot are l ...
In order to eliminate internal and surface defects, which appear in the ingots during continuous casting of metallic alloys, homogeneous and fine structures are often required. Therefore, when the adjunction of inoculant substances is not possible, the ele ...
The prediction of the ingot deformation during direct chiil (DC) and electromagnetic (EM) casting of aluminum alloy slabs would allow the optimization of the moldlinductor shape capable of producing flat ingots. The transient thermomechanical model present ...
The mechanical properties of continuous fibre reinforced metals (CFRMs) are known to be very sensitive to the selection and composition of the metallic matrix; for aluminium based CFRMs, commercial alloys are not suitable for this purpose. In the present s ...
The deformation and the temperature field within direct chill (DC) and electromagnetic (EM) cast aluminum ingots have been measured in-situ using a simple experimental set-up. The deformation of the cross section of the cold ingots has also been characteri ...
Hot tear is one of the most serious defect which a casting can suffer. It represents a major limitation to the production of foundry cast parts and to the productivity of continuous casting processes such as the direct chiil casting of aluminium alloys. As ...
The aims of the preliminary study reported in this document were twofold. Firstly, within the context of the application of UHPFRC for the rehabilitation of reinforced concrete structures, to identify the phenomena that require further study with respect t ...
The deformation and the temperature field evolution within direct chiil (DC) and electromagnetic (EM) cast aluminum ingots have been measured in-situ using a simple experimental set-up. The deformation of the cross section of the cold ingots bas also been ...
A comprehensive three-dimensional mathematical model based upon the Abaqus software has been developed for the computation of the thermomechanical state of the solidifying strand during direct chill (DC) casting of rolling sheet ingots and during subsequen ...
