Scalable Video Dissemination with Prioritized Network Coding

In this paper, we present a pull-based dissemination protocol for efficient distribution of scalable video content in overlay peer-to-peer networks with mesh structures. The proposed protocol employs prioritized network coding, where the network coded packets belong to classes that represent packets of different priorities. For a receiver, the pull procedure begins with the reception of buffer vector messages from the senders, which bring information about the numbers and classes of available packets. The receiver node decides on the rate allocation of the different classes to be requested from each of the senders. The rate allocation is cast as a video quality maximization problem and solved using a hill-climbing algorithm. The simulation results show that the proposed mechanism, which is able to fully adapt to network dynamics, accounts for the unequal packet importances and utilizes the network resources efficiently.

Selection of Network Coding Nodes for Minimal Playback Delay in Streaming Overlays

Nicolae Cleju, Pascal Frossard, Nikolaos Thomos

Network coding permits to deploy distributed packet delivery algorithms that locally adapt to the network availability in media streaming applications. However, it may also increase delay and computational complexity if it is not implemented efficiently. We address here the effective placement of nodes that implement randomized network coding in overlay networks, so that the goodput is kept high while the delay for decoding stays small in streaming applications. We first estimate the decoding delay at each client, which depends on the innovative rate in the network. This estimation permits to identify the nodes that have to perform coding for a reduced decoding delay. We then propose two iterative algorithms for selecting the nodes that should perform network coding. The first algorithm relies on the knowledge of the full network statistics. The second algorithm uses only local network statistics at each node. Simulation results show that large performance gains can be achieved with the selection of only a few network coding nodes. Moreover, the second algorithm performs very closely to the central estimation strategy, which demonstrates that the network coding nodes can be selected efficiently in a distributed manner. Our scheme shows large gains in terms of achieved throughput, delay and video quality in realistic overlay networks when compared to methods that employ traditional streaming strategies as well as random network nodes selection algorithms.

2011

Rate allocation and optimized decoding in inter-session network coding

Eirina Bourtsoulatze

Recent advances in data processing and communication systems have led to a continuous increase in the amount of data communicated over today’s networks. These large volumes of data pose new challenges on the current networking infrastructure that only offers a best effort mechanism for data delivery. The emergence of new distributed network architectures, such as peer-to-peer networks and wireless mesh networks, and the need for efficient data delivery mechanisms have motivated researchers to reconsider the way that information is communicated and processed in the networks. This has given rise to a new research field called network coding. The network coding paradigm departs from the traditional routing principle where information is simply relayed by the network nodes towards the destination, and introduces some intelligence in the network through coding at the intermediate nodes. This in-network data processing has been proved to substantially improve the performance of data delivery systems in terms of throughput and error resilience in networks with high path diversity. Motivated by the promising results in the network coding research, we focus in this thesis on the design of network coding algorithms for simultaneous transmission of multiple data sources in overlay networks. We investigate several problems that arise in the context of inter-session network coding, namely (i) decoding delay minimization in inter-session network coding, (ii) distributed rate allocation for inter-session network coding and (iii) correlation-aware decoding of incomplete network coded data. We start by proposing a novel framework for data delivery from multiple sources to multiple clients in an overlay wireline network, where intermediate nodes employ randomized inter-session network coding. We consider networks with high resource diversity, which creates network coding opportunities with possibly large gains in terms of throughput, delay and error robustness. However, the coding operations in the intermediate nodes must be carefully designed in order to enable efficient data delivery. We look at the problem from the decoding delay perspective and design solutions that lead to a small decoding delay at clients through proper coding and rate allocation. We cast the optimization problem as a rate allocation problem, which seeks for the coding operations that minimize the average decoding delay in the client population. We demonstrate the validity of our algorithm through simulations in representative network topologies. The results show that an effective combination of intra- and inter-session network coding based on randomized linear coding permits to reach small decoding delays and to better exploit the available network resources even in challenging network settings. Next, we design a distributed rate allocation algorithm where the users decide locally how many intra- and inter-session network coded packets should be requested from the parent nodes in order to get minimal decoding delay. The capability to take coding decisions locally with only a partial knowledge of the network statistics is of crucial importance for applications where users are organized in dynamic overlay networks. We propose a receiver-driven communication protocol that operates in two rounds. First, the users request and obtain information regarding the network conditions and packet availability in their local neighborhood. Then, every user independently optimizes the rate allocation among different possible intra- and inter-session packet combinations to be requested from its parents. We also introduce the novel concept of equivalent flows, which permits to efficiently estimate the expected number of packets that are necessary for decoding and hence to simplify the rate allocation process. Experimental results indicate that our algorithm is capable of eliminating the bottlenecks and reducing the decoding delay of users with limited resources. We further investigate the application of the proposed distributed rate allocation algorithm to the transmission of video sequences and validate the performance of our system using the NS-3 simulator. The simulation results show that the proposed rate allocation algorithm is successful in improving the quality of the delivered video compared to intra-session network coding based solutions. Finally, we investigate the problem of decoding the source information from an incomplete set of network coded data with the help of source priors in a finite algebraic field. The inability to form a complete decoding system can be often caused by transmission losses or timing constraints imposed by the application. In this case, exact reconstruction of the source data by conventional algorithms such as Gaussian elimination is not feasible; however, partial recovery of the source data may still be possible, which can be useful in applications where approximate reconstruction is informative. We use the statistical characteristics of the source data in order to perform approximate decoding. We first analyze the performance of a hypothetical maximum a posteriori decoder, which recovers the source data from an incomplete set of network coded data given the joint statistics of the sources. We derive an upper bound on the probability of erroneous source sequence decoding as a function of the system parameters. We then propose a constructive solution to the approximate decoding problem and design an iterative decoding algorithm based on message passing, which jointly considers the network coding and the correlation constraints. We illustrate the performance of our decoding algorithm through extensive simulations on synthetic and real data sets. The results demonstrate that, even by using a simple correlation model expressed as a correlation noise between pairs of sources, the original source data can be partially decoded in practice from an incomplete set of network coded symbols. Overall, this thesis addresses several important issues related to the design of efficient data delivery methods with inter-session network coding. Our novel framework for decoding delay minimization can impact the development of practical inter-session network coding algorithms that are appropriate for applications with low delay requirements. Our rate allocation algorithms are able to exploit the high resource diversity of modern networking systems and represent an effective alternative in the development of distributed communication systems. Finally, our algorithm for data recovery from incomplete network coded data using correlation priors can contribute significantly to the improvement of the delivered data quality and provide new insights towards the design of joint source and network coding algorithms.

EPFL2013

Rigid body dynamics simulation for robot motion planning

Alan Ettlin

The development of robot motion planning algorithms is inherently a challenging task. This is more than ever true when the latest trends in motion planning are considered. Some motion planners can deal with kinematic and dynamic constraints induced by the mechanical structure of the robot. Another class of motion planners fulfill various types of optimality conditions, yet others include means of dealing with uncertainty about the robot and its environment. Sensor-based motion planners gather information typically afflicted with errors about a partially known environment in order to plan a trajectory therein. In another research area it is investigated how multiple robots best cooperate to solve a common task. In order to deal with the complexity of developing motion planning algorithms, it is proposed in this document to resort to a simulation environment. The advantages of doing so are outlined and a system named Ibex presented which is well suited to support motion planner development. The developed framework makes use of rigid body dynamics algorithms as simulation kernel. Further, various components are included which integrate the simulation into existing engineering environments. Simulation content can be conveniently developed through extensions of well-established 3D modelling tools. The co-simulation with components from other domains of physics is provided by the integration into a leading dynamic modelling environment. Robotic actuator models can be combined with a rigid body dynamics simulation using this mechanism. The same configuration also allows to conveniently develop control algorithms for a rigid body dynamics setup and offers powerful tools for handling and analysing simulation data. The developed simulation framework also offers physics-based models for simulating various sensors, most prominently a model for sensor types based on wave propagation, such as laser range finding devices. Application examples of the simulation framework are presented from the mobile robotics rough-terrain motion planning domain. Three novel rough-terrain planning algorithms are presented which are extensions of known approaches. To quantify the navigational difficulty on rough terrain, a new generic measure named "obstacleness" is proposed which forms the basis of the proposed algorithms. The first algorithm is based on Randomised Potential Field Planners (RPP) and consequently is a local algorithm. The second proposed planner extends RRTconnect , a bi-directional Rapidly Exploring Random Tree (RRT) algorithm and biases exploration of the search space towards easily traversable regions. The third planner is an extension of the second approach and uses the same heuristic to grow a series of additional local RRTs. This allows it to plan trajectories through complex distributions of navigational difficulty benefitting from easy regions throughout the motion plan. A complete example is shown in which the proposed algorithms form the basis for sensor-based dynamic re-planning simulated in the presented framework. In the scenario, a simulated planetary rover navigates a long distance over rough terrain while gathering sensor data about the terrain topography. Where obstacles are sensed which interfere with the original motion plan, dynamic re-planning routines are applied to circumnavigate the hindrances. In the course of this document a complete simulation environment is presented by means of a theoretical background and application examples which can significantly support the development of robot motion planning algorithms. The framework is capable of simulating setups which fulfil the requirements posed by stateof-the-art motion planning algorithm development.