Dissolution theory applied to the induction period in alite hydration
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The combination of calcined kaolinitic clays and limestone in Limestone Calcined Clay Cement (LC3) is a promising approach to reduce the cost and the CO2 emissions of cement production by reducing the clinker content of cement. This thesis investigates the ...
Supplementary cementitious materials (SCM) lower the environmental impact of cement and concrete but react more slowly than Portland cement, which therefore limits the levels of substitution possible as reasonable early strengths are necessary. One of the ...
Cement hydrates and their chemically bound water content are sensitive to changes in relative humidity (RH) and temperature. This may cause specific solid volume changes affecting dimensional properties of hydrated cement paste such as shrinkage, swelling ...
Calcium aluminate cements (CAC) are often used in combination with calcium sulfate and Portland cement for special applications where rapid setting, rapid drying and shrinkage compensation are required. A growing fraction of the clinker, which has the high ...
The filler effect, due to the physical presence of mineral additions in cement, is mainly known to accelerate the hydration of the clinker component. Previously, this was attributed to the surface of the filler providing nucleation sites for C-S-H as there ...
The modeling platform µic has been extended to study the hydration of cement based systems. It is shown that the hydration kinetics of alite can be described through the implementation of two mechanisms: a solution controlled dissolution (SCD) mechanism fo ...
Supplementary cementitious materials (SCMs) are currently used to replace part of the clinker to reduce the environmental impact of cement and to favor the use of local materials. Two representative SCM have been used in this work: slag and fly ash. Each o ...
In this study synchrotron X-ray absorption spectroscopy (XAS) has been applied, an element specific technique which allows Fe-containing phases to be identified in the complex mineral mixture of hydrated cements. Several Fe species contributed to the overa ...
This paper describes a macroscopic model of the chemo-thermo-poromechanical behaviour of a hydrating cement paste. The hydrating cement is viewed as an open hardening porous medium. The increments of elastic and viscoelastic strain, pore pressure, temperat ...
A dedicated diffusion controlled precipitation model for AlMnFeSi-alloys, based on classical nucleation and growth theory, has been implemented and coupled to a phenomenological softening model accounting for the combined effect of recovery and recrystalli ...
