Stability analysis of the Interconnection of the LHC Main Superconducting Bus Bars
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Detailed surface measurements of the heat transfer coefficient and the film cooling effectiveness by application of the transient liquid crystal method were carried out on a heavily film cooled nozzle guide vane (NGV) in a linear cascade wind tunnel at the ...
American Soc Mechanical Engineers, Three Park Avenue, New York, Ny 10016-5990 Usa2008
The phase I LHC upgrade foresees the installation of a new final focusing for the high luminosity experiences in order to be able to focus the beams in the interaction points to ß* 0.25 cm. Key element of this upgrade is a large bore (120 mm) superconducti ...
The paper presents an application of the transient heater foil measurement technique using thermochromic liquid crystals (TLC) to endwall heat transfer and film cooling investigations in a transonic turbine vane cascade. The film cooling configuration cons ...
American Soc Mechanical Engineers, Three Park Avenue, New York, Ny 10016-5990 Usa2008
The commissioning and the exploitation of the LHC require a good knowledge of the stability margins of the superconducting magnets with respect to beam induced heat depositions. Previous studies showed that simple numerical models are suitable to carry out ...
The stability is a key issue to design superconducting magnets and to ensure their proper exploitation. This is the case of the imminent operation of the Large Hadron Collider (LHC) accelerator, which requires a good knowledge of the stability margin of it ...
An experimental investigation of the flow and heat transfer characteristics in internal coolant passages of gas turbine airfoils has been conducted. The PIV method was employed for the flow measurements. A stereoscopic PIV system was used and automated. Th ...
The conceptual design of the large gap Spectrometer Dipole for the LHC-b experiment is presented here. The required acceptance implies a gap height of 3.6 m and a width of 4.3 m. Although the magnetic induction of the 1.92 m long magnet is only 1.1 T, it t ...
